Quantcast
Jump to content

fuel tuners in 1100, joyner


Recommended Posts

  • 1 month later...
  • 1 year later...

silverbullet.

On the Nitrous i would be careful.The pistons use vary thin rings and with that burst of power they could fail.Not good.We are going in a different direction we are going to use water meth injection.The meth will cool the charge 100 dig. and raise the octane to 115 on reg gas.That is race gas octane.More info call 928 344 2117

We all ready have a system.But we are trying to keep cost down so a little more research.Our 800 cc supercharger is being tested.At Glamis and Yuma trails.What some guys i hear is when.Well we do not only sell Performance parts but we rebuild engines about 40 to 50 each year.You guys have been buying turbos kits and building them and all i ever hear is they don't work.And yet you still buy them whats up with that.We want it to be easy to install and be reliable and get more power.My focus will be the supercharger from now on.Till its ready and meets all of above.I am selling Renli parts Sand Reeper parts and Joyner parts.We have the best parts Chery Engine parts.We sell Joyner parts for less money.Like you we still need to make money for all this research.We do sell Joyner Differential fully up grader buy us.It is a Lenny style up grade and we still sell it for less.Even the 650 commando rear differential.

Monday to Friday

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By weasel
      starts up you have keep rpms up for 5 minutes till it warms up then runs fine. But if it stalls wont start unless you unplug fuel pump and hold it to the floor till it starts then plug pump back in and run it till it warms up then it is fine all day.
    • By Round
      Bought a Massimo 500 last night. Stopped and filled it up on the way home and I put the wrong gas in it. Is there a drain plug on the bottom of the tank that I can get to or will I have to siphon it out?
    • By Kalyla Jackson
      Hey all!
      I'm on a mission to buy my first UTV soundbar as a gift for my dad. I'm aiming for something that offers great sound quality without breaking the bank – my budget is around $250. Right now, I'm considering options like ecoxgear, kemimoto, and boss.
      Does anyone have experience with these brands or specific models that you'd recommend? Any advice or suggestions would be super appreciated!
      Thanks in advance for your help!



    • By FloridaMan
      I have a 2012 Massimo MSU 500 that died. I found that it didn't have spark and the fuel pump wouldn't run. Checked all fuses and none were blown.
      Went through and replaced the ignition coil, HT lead and spark plug. Still no spark.
      Thought it could be the fuse/relay box because I didnt' know much about the machine at that point so I replaced it. No spark.
      Then I replaced the ECM just because I was running out of ideas. No spark.
      I removed the 9 pin connector and hardwired it making sure that they were no wires got swapped. Still no spark.
      Then I replaced the wiring hardness. In doing so, I replaced the 9 pin connector with new ones. I made sure all wires were matched up between the engine harness side and the other harness assembly. Still no spark.
      I have no other ideas what to do. My fuel pump doesn't kick on and I have no spark. I have 12V on the fuel pump, ignition coil and fuel injector, but no ground from the ECM control.  I unplugged the fuel injector and waited for a diagnostic code but nothing ever came in. It makes me think that the ECM isn't powering up. I've checked for 12V on pins 18 (purple wire) and 15 (white and black wire). I also checked for ground on pin 2 (black wire). All are good.
      I am out of options here and I have no idea what else it could be. I have all connections redone and are coated with dielectric grease. I've checked all easy things like fuses and making sure I have 12V in the right placed. I would appreciate any help.
    • By Moos
      I replaced the fuel pump, ended up with a couple bad ones. This last one now worked fine for about 150 miles, now only works when its cool outside. (30-40). As soon as we hit 55 degrees, It will not run. Barely starts, runs rough, will not move. Any ideas? Another bad pump? Something else going on? Any help would be appreciated. Thanks.
×
×
  • Create New...