Quantcast
Jump to content

SxS Adventure Rally - Year 2!


Recommended Posts

SxS Adventure Rally. The thrill of exploration, the excitement of speed, the sensation of mother nature and machines.

REGISTRATION OPENS FOR THE 2016 SXS ADVENTURE RALLY ON AUGUST 1ST!

Our first year was a hit. Year two will be even bigger and better!

If you missed the inaugural SXS Adventure Rally last year, make sure you mark your calendar now for another amazing event. Plan on coming out and having a blast with us this year and with people from all over the United States.

November 10-12, 2016

YOU DO NOT HAVE TO ENTER THE EVENT TO COME ENJOY THE VENDORS AND DO TEST DRIVES.

Experience the best of many Side by Sides and UTV's in the industry — the thrill of exploration, the excitement of speed, the sensation of mother nature and machines.

What is the Side x Side adventure at Sand Hollow?

Side x Side Adventure at Sand Hollow is a family friendly event with guided trail rides, primarily rock crawling with some less technical scenic rides in and around Sand Hollow State Park in Hurricane, Utah. Dates are November 10th, 11th and 12th, 2016.

Come down to southern Utah and test drive the latest offerings from the top manufacturers, take guided trail rides around Sand Hollow, get fed and meet new people. There is plenty of dry-camping available on site.

Average temp for November is Sunny and 65 degrees, perfect riding weather!

Even if you can't make it for the guided trail rides, come for the test drives and open riding. Sand Hollow will be open for riding approx. 2pm once the guided trails are back. (Sand Hollow State Park charges a $10 day use fee to enter the park.)

CST is excited to be the title sponsor of the CST Outdoor Adventure Rally at Sand Hollow. CTS's sales manager, Eric Tweedy, had this to say about the event: “It is going to be a great event and we are looking forward to showcasing our new SxS tires to the public. We are also pumped to support the industry at the grassroots level which is the heart and soul of the ATV/UTV industry” .

435-215-9679
[email protected]
Off Road Sports, LLC

Link to comment
Share on other sites

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By AlphaSerenity
      Hello,
      Before I invest $10k+ into a brand new UTV for the farm, I want to get my feet wet with a fixer upper and learn the mechanical side of things. I acquired a 2022 Hisun Axis 500 (Lowes-specific model) from an auction for $500. It has only 200 hours and 120 miles on the engine. It looks like the previous owner used it for ranch work and didn't drive it on trails, deep water/mud, or anything too crazy.
      While it runs and moves, it has some problems. It struggles to accelerate up any incline in high and low range and sometimes stalls when I let off of the throttle or change gears. When I apply throttle in neutral, it sounds like it is struggling for fuel/air and pops. When I decelerate, there is a grinding sound coming from the clutch, which I've read to be related to the one way bearing and is semi-common. The last thing I've observed is sometimes the speedometer display sometimes will show a much higher value for a few seconds after barely touching the throttle. Based on the documentation, if a problem is detected from the sensors, the instrument panel display should have an error code rendered on the screen in place of the time, but this isn't happening. Here is a video showing some of these issues (engine is exposed with console removed):
      https://www.youtube.com/watch?v=FFAkO5TaGps
       
      Here is another video of the clutches in action:
       
      I've done some research, but information on this specific unit and sister units is limited. There does seem to be transmission and clutch issues reported. I still need to check into the head gaskets. I don't have the equipment to test compression right now, but I do plan on ordering what is needed soon. I do have an order in place for some cables to read the diagnostics from the computer. There is a shop two hours away from me that works on Hisun products, but I am hoping the problem can be identified and is something within my ability to handle. Below is what I've already investigated.  I am leaning towards the primary clutch needing replacement right now.
      After getting it home and unloaded, I did the following maintenance/checks to it prior to operating it further:
      Changed the engine/clutch oil (and filter) and gear oils using manufacture recommended viscosity Changed the air filter and checked for cracks in the air intake flow. Verified good suction. Cleaned the throttle body Changed the spark plug and verified the gap was within spec (0.6-0.7mm) Changed the coil and coil wire Changed the fuel lines, fuel injector, and verified the fuel pump was outputting the correct initial prime pressure for ignition and continuous pressure after ignition. Also completely emptied the fuel tank and made sure octane 91+ fuel is being used per manufacturer specs. Ran seafoam through system too. Cleaned the spark arrester and verified no cracks or gaps in the exhaust flow Changed out the O2 sensor Checked all wired connections to ensure they were secured and no breaks were visible Checked the belt for tightness and for any signs of wear and tear Verified 4WD and the differential lock function as expected - still hesitates and struggles uphill Verified the fan gears in the shifter are not corroded and working as expected ECU was reset after replacing sensors and fuel-related parts  
       
      Thanks!
    • By johnpeter
      2016 Polaris Ranger 570 4WD On Ebay
      https://www.ebay.com/itm/166657642388?

    • By Felderlostnspace
      2016, Hisun 500 turns over great but Spark plug is firing when I turn the ignition key on. I’ve got good fuel pressure to the injector. Pulled plug out and it is wet with. gasoline. Air filter is clean. Turns over great just does not even try to pop or start.. I’ve checked off uses and they are good when I turn the key on I’m getting power to the injector.. I’m not hearing the injector pulsing, but may just be my hearing.. With the spark plug getting wet with gas I feel like the injector is pulsing and spraying. Any suggestions would be great. I don’t know the hours on the unit offhand, but it has 600 miles on it. Thank you for your comments and advanced.
    • By Alex
      View File 2016 Yamaha Wolverine 700 Service Manual
      2016 Yamaha Wolverine 700 Service Manual
      YX70EPNG
      YXE70WPXG
      YXE70WPHG
      YXE70WDXG
      YXE700E
      Submitter Alex Submitted 03/02/2024 Category Yamaha  
    • By Grub
      Good afternoon. 
      im in the market for doors for my ranger/ rzr sxs. I’m finding lower doors, but what I’d really want is full doors so I don’t have to unzip when exiting. I have a hardtop if it makes any difference. Anyone? 
×
×
  • Create New...