Quantcast
Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 06/02/2020 in all areas

  1. Picked it up Saturday...absolutely love it.
    2 points
  2. I strongly suggest you call Kawasaki Customer Service for some answers. Did you put a deposit down, or pay, for the Mule ? If you didn't , you may have a longer wait than expected. Other customers that have paid will get their machines before those who have not. The latest Kawasaki News advertises the 2021's are out now. The Kawasaki Mule is worth waiting for. I have mine all decked out now...Great Mule !...Good Luck to you !...Your Great Adventure Is Waiting for You !...
    1 point
  3. Got to work on the carb yesterday, after I blew a pressure hose on the front end loader. That's gonna tear up a $200.00 bill!!! Anyway, got the limiter cap off, ground off the stop tab and popped it back on so as to have a screw driver slot to adjust with. Cranked up the mule and let it warm up, about 10 minutes or so. Started by closing down on the pilot screw to drop the idle, then began slowly backing it out until the highest idle was reached and wouldn't go any higher, turned it back in about 1/8 of a turn or so, readjusted the idle, by ear to what seemed close. Idled great. Time for a test ride. Pulled off very smoothly with no stutter, all the way up high speed. Ran like a champ. Tried it several times in forward and reverse, same response. The only time it wanted to stumble was when I'd get down on it from a dead stop, then a bit but cleared right up. Since these aren't racing machines, and they're driven for what they are, a utility vehicle, I couldn't be happier. Travis, I want to thank you again for all the help and support. Let me know if you ever need anything... Roger
    1 point
This leaderboard is set to New York/GMT-04:00
×
×
  • Create New...