Quantcast
Jump to content

danoone

mule locking gas cap

Recommended Posts

hello, can anyone help me find a locking gas cap for a 2005 3010 4x4 mule. a friend from panama asked me to look and i haven't been able to come up with any. thanks

Share this post


Link to post
Share on other sites


hello, can anyone help me find a locking gas cap for a 2005 3010 4x4 mule. a friend from panama asked me to look and i haven't been able to come up with any. thanks

You might check Auto Zone or Napa. It's a small cap but they may have something or point you in a the right direction.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Robbie Wyre
      I'm working on a 2005 Cub Cadet side by side and I'm trying to remove the front two axles.  I have a slide hammer puller on the inner joint and with all my strength they will not budge.   Anyone have the same issues and is there something I'm missing or a trick of some sort to pull these out?   Any suggestions please and thank you.
    • By CAPTAINSTARFLEET
      Greetings all
       I have a 99 kawasaki mule 550  kaf300c3 That I ordered new valve guides for. Problem is my valves don't fit in new valve guides. Part number is correct. 
       Is it possible that valve guides need to be installed and reamed before the valves will fit into the  guides?   Just seems like an awful lot of material to have to remove by reaming.
      Thanks for any help
       
    • By rjfrider
      Mule Pro MX question:  Is there a trick to removing the center floor panel or "tunnel" other than removing the 8 plastic rivets?  I removed the rivets but the panel won't pop up easily, and I don't want to force it with a crow bar so as not to break some tabs or other hidden parts.  Accessory mount instruction attached.  Thanks for your help.  rider
      Mule Pro MX floor tunnel.pdf
    • By Brando hart
      Please help, About to buy a new 2020 mule 700 MX. For driving back to my cottage which is only accessible by a 5 km off-road trail. My parents currently have a 2010 teyrx which does the job for a joke. The trail is fairly smooth -1 big rock Rock section that you have to climb. A big  rtv 1100 Kabota does it no problem as well. 
      I am looking into the mule because of its bench seat. One of my dogs cannot run in front because they’ve had a hip replacement. she also has anxiety and is not fare well on the teyrx. We think mainly because she can’t get comfortable because of the centre consul. We were thinking because of the mules bench seat she would be able to sit comfortably between me and my wife.
      my concern is the mules off-road capability. Do they fare pretty well in the woods/decently smooth ride?
      I also plan to do yardwork and plough my driveway with this mule MX. I love the size of it as well, Because it will be easy to store in my shed plus tow behind in my SUV.
      please let me know what it’s like in the woods/snow (in Nova Scotia we mainly only have 5inchs Of snow fall on the ground at a time)
      please help, me with Determining its off-road capabilities. determining it’s off-road capabilities and keep In mind the trail is in good condition. Also my 700 Yamaha raptor, and 400ex use to do the trail amazing. To give an idea that the trail of pretty good.
    • By Karla Phelps
      A arm bushings needed for a 650 Joyner 2005


×
×
  • Create New...