Quantcast
Jump to content

Kinarfi

Head Light Bulbs, Has any one found replacements

Recommended Posts

Got done with my rewire and only made a few mistakes, got the 2wd and 4wd wires reversed. I ran the winch all the way out and back in and it seems my FET H bridge will handle the load, probably ought to try lifting it off the ground to make sure it can handle every thing rather than find out it can't in the field when needed the most.

Also need to replace the head light bulbs but I can't find one locally.

I thought I'd ask if any one has found a replacement, then start browsing the Internet.

Share this post


Link to post
Share on other sites


Replacement Headlights I used are Sylvania H5006 High/Low. I would imaging the number is the same for any manufacturer. The Headlight sockets to change it over are Dorman 9003 High Temps.....

Share this post


Link to post
Share on other sites

So instead of changing just the little bulb, you changed the whole light, I assume it fits right into where the old on was, or did you have to change or modify anything?

Thanks

Kinarfi

Share this post


Link to post
Share on other sites

Changed to light force lights. That is when I discovered I had wiring issues in the passenger fuse block.

Share this post


Link to post
Share on other sites

Thanks bigdan120, Put 2 Sylvania H5006 lights in today, but instead of buying the Dorman plug, I soldered some wires on and use some connectors I have on hand. Haven't had it out at night yet, maybe tonight.

Thanks, Kinarfi

  • Like 2

Share this post


Link to post
Share on other sites


hi all maybe this has been addressed idk. What are the connectors called coming off the main headlight with 4wires, 2hi/2lo+ground. I'm looking at a HID kit which has two 2wire connectors, like the fog lights have. is that a standard size, or number ?

You'll never drown, if you're born to hang

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Trackrun
      Can anyone help me locate the back up siren?  It is so loud it really hurts my ears.  I'd like to be able to disable the noise or at least muffle it.
    • By strike250
      Hello to all. I have been swamped with phone calls and emails about products and information on the Strike and Sector 250. So, I have decided to return in a limited capacity. I have re opened the website for the Hisun products. I have listed a lot of helpful tips and tricks. I have also listed where you can purchase the products and more information for free. I am doing this as I still have fun with our own personal Hisun and I want other parents out there to continue to enjoy this little machine and with my help, everyone will have a blast on them.  I still have a few items in stock such as lift kits and some other items, but for the most part, I have listed the part numbers and where to get them online. If you have any questions, please feel free to contact me and I will do my best to help you. www.warriorsoffroad.com is the link to the site, there you will find things like a free service manual, guides, tips and more. There is a free download section with lots of files. There is also a list of items that are the most asked for with information on them.
      Matt
    • By Steve T
      Has anyone installed a backup alarm on a mule sx. If so is it easy to figure out where to install the switch. 
      I found the directions. It was very easy to install.
      ii_KAF600024.pdf


×
×
  • Create New...