I have a Joyner 1100cc Sand Viper in need of repair.  Does anyone know a repair shop or mechanic that services these in southern California?

Hello-
 
New to the forum so luckily there is some help out there lol. Recently bought a 2008 Joyner 1600cc sand viper and loving it. Took it out and had a little accident with a tree stump lol. The stump hit directly on my passenger side tie rod end and broke the heim joint that connects the tie rod end to the wheel. Does anyone know the size of the adjustable heim joint so I can order one? I am having a hard time sourcing one quickly. I am also guessing since it is an outter tie rod end, that it is LH pitched rather than RH? thanks for any help anyone can provide. This is again for the outter tie rod end heim joint that snapped. Thanks

Hi,  can someone please verify if my timing marks are correct?   
The images are of the timing marks at TDC.  the Crank/Cam marks look right on, but I was surprised to see the cam's timing marks completely off the page.   I was thinking I had it 180 out somehow because that's the symptoms I'm experiencing when trying to start it.   When I'm cranking it, and trying at full throttle, I hear some light (muffled) backfiring that sounds like on the intake side.   

Disclaimer:  My spell checker thinks it knows more of what words I want to use than I do.  Typos are not my fault.
This is a general comment on the support I received from Joyner-USA in Phoenix, AZ.  I needed one headlight assembly for my Renegade because the mounting pin was broken.  Duct tape and bailing wire held it in place for a few years.  To my surprise, they had them IN STOCK.  I bought two and kept one of  my good old ones as a backup.   They completed their move to a new address at 2415 S 18th Pl, Phoenix AZ from their former Riverside location.  As a gift, Jake gave me two T-shirts.  He said he as most of the parts for my  2014 Joyner Renegade.  I looked at his yard and he has several engines and UTVs in stock, mostly the 1100cc engines and several Renegades.  Maybe a Trooper or two was buried in there somewhere.  Everything was crated and outdoors.  I hope he moves his inventory indoors, out of the weather.  Their website says their hours are 9:00AM - 5:00PM but their actual hours are 10:00AM - 5:00PM.  I arrived at about 9:20AM and no one was there; place locked up.  I was a little upset that with a 9:00AM opening, someone should have been there.  I was concerned that I made a 70 mile round trip for nothing.  Fortunately, one of his employees showed up and told me of their later hours.  So, everything turned out fine.  I got the parts I needed and two T-shirts.  This is based upon a one time, 1st time experience.  I hope future vists are just as good.

Anyone have an outer cv joint ball cage? Mine is cracked up. Other than that it's a good axel.
Please let me know