Quantcast
Jump to content

Dwight

2008 Joyner Trooper Speedometer not working

Recommended Posts

Hi new to the Joyner trooper family just purchased a 2008 trooper, however the speedometer , coolant temp and voltmeter are not working I was hoping it was a continuity or ground issue but the copper is testing good, it appears the voltmeter is bad as my fluke works off the plug-in behind the gauge, tested the water temp sensor have 5 volts arriving, and approximately 3000 ohms on sensor cold no idea what I should get. As far as the speedometer have no idea how to test again copper seems to have good continuity. Any help would be greatly appreciated.  Thanks Dwight 

Share this post


Link to post
Share on other sites


It had been my experience that problems are usually in the fuse blocks and connectors.

Did some wheeling at LBL Kentucky yesterday...and found a mud hole!

cdccde1ce88341c7ad45a9d5d0852874.jpg7d2982a9100eff82283ba978dedd8a4f.jpg

Share this post


Link to post
Share on other sites

Thanks Dave  I have ordered new temp sensor and speed sensor will post results. I am looking for a voltage meter would prefer stock if priced right, might end up with aftermarket digital. 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Kinarfi
      Dealers - - - also see http://www.utvboard....dpost__p__16044 & http://www.utvboard....dpost__p__16045
      No Limits Powersports in Arlington Texas - Contact Jarrad (Snowman6479). (817)695-1151 http://www.joyner-atv-utv.com/
      Silver Bullet Motorsports in Yuma Arizona - Contact (silverbullet). (928) 344-2117 http://www.silverbul...otorsports.net/
      Thin Air Powersports in Spring Creek Nevada - Contacts Tim (Anylizer) or Amanda (Long Track Lady) (775)753-8223 http://www.thinairpowersports.com/
      McCoy Motorsports in Pikeville Kentucky - Contact Art (Art) (606)432-1556 http://www.tobefast....sa-c-63727.html
      Mudslingers Motorsports, Alberta, Canada, Trevor Carson (780) 576-2860 cell: (780) 984-2711 http://www.mudslinge...website_006.htm
      Joyner USA In Phoenix Arizona - Contact Brandon Deruiter Office (480) 882-9612  Email [email protected]   Web site Joyner-usa.com

      I also take suggestions for any and everyone!!
      parts & pieces from dealer in Germany
      http://www.utvboard.com/topic/3168-joyner-parts-and-all-chery-and-lj276-engine-parts/?p=18349
      AIR FILTER K&N RU-1000, RC-4160, and another link
      If you have the new 09 filter box, w/ Fram # CA-7764
      ALTERNATOR BELT 14mmx 755mm replacement that works....Carquest #K040292
      Alternator Belt - Checkers Auto Parts KO40292 - Exact Match
      Battery, according to 2 scoops, Duralast 51-DL is the correct size.
      OIL FILTERS
      Troopers with Thread Size 20X1.5 MM can use:
      WIX 51347, 51334 --- Napa 1347, 1334, PS1334 --- Fram PH6010A, PH3593A
      Troopers with Thread Size 3/4X16 " can use:
      Fram PH4967, Napa 1394 & Wix 5194 (slightly longer than original, Wix 51396 (even longer yet).

      OIL COOLER See thread, http://www.utvboard....768-oil-cooler/

      Oil Pressure Gauge Replacement
      Zorro found some at his Local Marine Supply store
      Sending Unit -- TeleFlex Morse Part # IA15001 0-80 psi, 240-33 ohm
      Gauge -- TeleFlex Morse Part # 57903P 0-80 psi, 240-33 ohm
      Manufactured by Veethree Elec. & Marine LLC
      together cost aprox $80.00
      Says it fits the existing hole perfectly Thanks Zorro
      Plumber added this reference; http://www.spydertal...pressure-gauge/ which Crosses over to a Sierra part# 01858990
      IMHO--I would move the the sender away from the exhaust manifold.

      FUEL FILTER replacement, Fram Fuel Filter G4777

      FUEL PUMP replacement, Bosch 0 580 254 910 According to Brostar, (Thank You!!)
      http://www.ebay.com/itm/Hayg-OEM-Inline-Fuel-Pump-0-580-254-910-0580254910-New-/230568738342#vi-content (updated 05-2015)

      PRE FILTER KNN-RC-4160-DK prefilter
      HEAD LIGHT REPLACEMENT Sylvania H5006 replaces the whole bulb, It works sooooo much better than the original.
      SPARK PLUGS NGK Iridium BKR5EIX-11, NGK 2387, NGK BKR7ES-11, Bosh 3311, Denso Iridium plug 5310 IK22

      CV Boot Kit There appears to be a difference between inner and outer boots, I used a NAPA CVB6862340 for my outer rear, fit good but not tightly on the CV end, I held it on with Tyraps
      Autozone part # 03606. Comes with bands and grease for $11.99, quick/split boot. K2181 95 Geo Metro $15.99
      NAPA #686-2149 fits for the Troopers inner CV. It's a speck tight but only about 1/16".(Lenny)
      Napa 686-2181 CV Boot from a 95 Geo Metro.
      http://www.norrecind...tart=1&cat=1394 or
      Norrec Industries then Application, then UTV, then look up joyner, they have them all
      Polaris CV Boot Kit # 2203438, (PR-8061)
      Also see CV boot for driveline? - UTV BOARD - Side X Side and UTV Forum

      Valves shims are 25mm, Joyner shims start at 2.18 and increase in increments of .02 up to 2.80, The Honda shims come out of CB450s and GL1100s, start at 2.30 and increase in increments of .05
      http://www.mawonline...gle/P137630.HTM
      http://stores.ebay.c...&_sid=120606839

      Master Electrical Switch Key
      http://www.jegs.com/...oductId=1231908
      http://www.pegasusau....asp?RecID=1467
      Make your own, it's easy, I did, just in case mine breaks.

      At the suggestion of one of our members, here's some info on the gas gauge sending unit.
      3 ohms is full, 13 ohms is 3/4, 23 ohms is 1/2, 63 ohm is 1/2, 110 ohms is empty.
      Electrical readings are: F=0.75v-98ma, 3/4=1.91v-82ma, 1/2=2.7v-71ma, 1/4=3.3v-62ma, 0=4.1v-52ma, E=5.0v-39ma
      0 is top of red zone, E is bottom of red zone.


      Manuals and Information


      Trooper T2 weights, 380lb. on each front wheel, 480 lb. on left rear, 520 on right rear TOTAL = 1760 pounds

      down load this and save it!!!!
      Torque Values Select Your type of bolt at the top. http://www.engineers...bles/torque.htm
      My Snorkel Made from a Sears ShopVac 7' Hose and the Extension Wand,


      Oil Drain QuickOilDrainValve.com
      http://www.oildrainvalve.net/ez-oil-drain-valve-ez-103-12mm-1-25/
      the best way to change oil, IMHO Kinarfi
      Fram Sure Drain #SD3

      Paint as recommended by Brostar: http://www.zynolyte..../rustmaster.asp

      Supplier of parts in General

      http://www.cxracing.com/default.aspx
      http://www.jegs.com/
      http://www.summitracing.com/
      Pegasus Auto Racing Supplies - Home Page
      TireRack.com
      McMaster-Carr
      Discount Hydraulic Hose.com

      Tie Rod Dust Boot, Checker Auto#13566

      Rod End / Heim Joint Seals , http://pitstopusa.co...-end-seals.html, thanks rocmoc
      Ball Joint Rod Ends AKA Heim Joints
      16 x2.0mm threat, 16mm ID, 21 mm thick,
      I got mine at McMaster-Carr 4483T36
      PTFE/Kevlar Insert, M16 x 2.0 x 40.mm shank, 21,966 lb static radial load capacity, 23°, $25.60 ea. or $204.80 for 8
      http://www.vxb.com/page/bearings/PROD/Kit12360
      http://www.vxb.com/page/bearings/PROD/Kit12960

      14 Inch Tires That fit our Stock Wheels Note that the stock lug bolt pattern is 4 X 115
      STEEL WHEELS http://www.utvboard....dpost__p__10804
      JC Whitney for all Auto parts - Car, Truck, Jeep, Motorcycle & RV Parts
      Interco Tires SSR-24R - INTERCO SSR Series Tire - Quadratec
      Interco Tires SAM-12 - INTERCO Super Swamper TSL Tire - Quadratec
      TSL Radial | Interco Tire
      Maxxis Bighorn 2.0 AT26 X 11R 14
      General Grabber AT2 27x8.50 R14 95Q 6PR OWL $90.10 http://ssl.delti.com.../GRABBERAT2.jpg
      National Chaparral A/P 27x8.50 R14 95Q 6PR OWL $113.80 http://ssl.delti.com...ChaparralAP.jpg
      Kumho Road Venture MT-834 27x8.50 R14 95Q 6PR OWL $110.30
      Mastercraft COURSER A/T 27x8.50 R14 95Q 6PR OWL $87.00 http://ssl.delti.com...t/COURSERAT.jpg
      Cooper Discoverer LT 27x8.50 R14 95Q 6PR OWL $99.60 http://ssl.delti.com...iscovererlt.jpg
      Laramie Performer RV 27x8.50 R14 95Q 6PR OWL $100.70 http://ssl.delti.com...PerformerRV.jpg
      ITP MUD LITE XTR 27-9-14 $87.99
      ITP TERRACROSS R/T 26-9-14 $144.99

      15 inch Wheels [Be sure to get the correct lug nuts, 12X1.5
      Vision Wheel Inc Vision Wheel
      ITP has one now also, getting info. ITP TIRES - The World's #1 ATV Aftermarket Tire & Wheel Source :: Holeshot

      Non Trooper Info
      u joints for joyner renegade are Spicer 5-1501X and Precision 391. They are American work great. graybeard9
      Differential Bolts
      40 28 to Full 25 96144A227• 8.33
      1100 Trooper T2 ECU Wiring Diagram.pdf

       
      Joyner Trooper Differential Rebuild Kit .doc
    • By Joshua Matiyasic
      I have a 2018 Massimo MSU 500. I have looked everywhere for performance parts and all I have been able to find is the dyno bost module and a K&N air filter. does anyone know of any other parts out there or interchangeable parts from other makes or models?
    • By 2scoops
      I am interested in any old trooper axle parts you may have lying around. Please let me know if your want to sell them. 
      Backstory:
      Hey everyone. Last trip out to moab I climbed a wall on poison spyder Mesa while 2 rzr xp1000's and three can am x3 xrc's watched me and didn't dare try. After doing it once I pulled around to show them it wasn't a fluke. One on the can am x3 xrc drivers just looked at me and said "that's steep". On the second try I spread the bell on the left rear axle. I made the climb but now the inner cage slips inside making a loud popping noise as twisting the boot. I mainly just need the inner bell but I am interested in anything you have. 
    • By bnold
      Afternoon,
      Doing some much needed overdue maintenance on the Joyner T2.  Believe mine is a 2011.
       
      In need of :
      - wheel bearings and seals (small and large)
               Outer 65x45x8
               Inner 62x42x8
               Bearing 02.D650.03.01.0005 - 65x35x35
      - Inner tie rod joints
           D800.05.01.00.0002
      - Upper and lower ball joints
           S650.02.01.01.01.00
      and I'm sure I'll uncover a few others as I continue the tear down
       
      What's the most reliable for parts now?
       
      - Casey Ye from China, assuming shipping cost and time would be higher.
       - Klung, China contact as well I believe.
       - MPSRacing.net
       - Is ordering from Joyner-USA working for folks?
             Address: 1650 E Riverview Dr Ste 110, Phoenix, AZ 85034        Phone: (602) 253-0283 Don't want it torn apart in the shop for too long.
       
       
      Is there a parts manual floating around for ordering the correct parts?  I have a 2009 parts manual I believe, but there are definitely differences between that model and mine.
      Hate to order the wrong stuff.
       
      Thanks,
       
       
    • By Travis
      Here i'm going to try and get the most needed parts, or maintenance parts listed for members and guests to help them get their buggy back on the trail.  * quite a few of these numbers are the same on early models.
      2007 & PRIOR KAWASAKI MULE 1000 (KAF450-B1) OEM PARTS
      OEM(kawasaki brand):  Air Filter 
       
      11013-1207
      Oil filter 
      OEM: 16097-0008
      WIX: 51365
      FUEL:
      Wix: 33011 
      OEM: 0032
      SPARK PLUG:
      NGK: D7EA
      KAWASAKI USES NGK AS THEIR OEM PART.
      |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
      2007 & PRIOR KAWASAKI MULE 2010 (KAF540-C1) OEM PARTS
      Air filter
      Kawasaki: 11013-1214
      Wix: 42439
      OIL FILTER:
      WIX: OIL FILTER. 51365
      KAWASAKI:  16097-0008
      FUEL FILTER:
      Wix: 33011
      Kawasaki: 49019-0032
      |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
      MULE 2020 (KAF540-D1) OEM PARTS
       
      Air filter
      Kawasaki: 11013-1214
      Wix: 42439
      OIL FILTER:
      WIX: OIL FILTER. 51365
      KAWASAKI:  16097-0008
      FUEL FILTER:
      Wix: 33011
      Kawasaki: 49019-0032
      |||||||||||||||||||||||||||||||||||||||||||
      MULE 2030 (KAF540-E1) OEM PARTS'
       
      Air filter
      Kawasaki: 11013-1214
      Wix: 42439
      OIL FILTER:
      WIX: OIL FILTER. 51365
      KAWASAKI:  16097-0008
      FUEL FILTER:
      Wix: 33011
      Kawasaki: 49019-0032
      ----------------------------------------------------
      MULE 2500 (KAF620-C1) OEM PARTS
      Air filter:
      Kawasaki 11029-1004
      Wix: wa10654
      Fuel filter:
      WIX:33011
      Kawasaki:49019-0032
      OilFilter:
      Wix: 51394
      Kawasaki:49065-2071
       
        I'm taking a break, this typing gets tiring fairly quick lol.
      numbers are accurate as of 3/23/19
       
       


×
×
  • Create New...