Quantcast
Jump to content

Verno

2018 cc 750 challenger info needed.

Recommended Posts

Ownership's manual says to change transmission oil every 400 hours. For the life of me I can't locate the drain / fill plug, or even the transmission.   TIA for any help.

Share this post


Link to post
Share on other sites


Welcome to the UTV Board.

I searched and Searched and could not find anything. I would suggest calling, or Live Chatting with  Cub Cadet customer service, they should direct you in the right direction.

 CC customer help --->  1-877-428-2349

  • Thanks 1

Share this post


Link to post
Share on other sites

Travis has given you probably your best lead. I'd strongly advise you to take it a step further, and request to purchase a shop service manual. It would be EXTREMELY helpful to assist you through normal maintenance interval service. But what's more important, is it'll be impossible to find, when you really need it for the inevitable. Eventually all machines break, but you'll be better prepared when this one does. Besides, it'll sure as heck answer the question you've put on the table here.  Welcome to the forum!

Share this post


Link to post
Share on other sites

If the service manual is no more informational than the owners manual, it wont be worth the trouble.   I appreciate the response, but so far there is little to know information on a rig with more than 100 hours on this forum.

Share this post


Link to post
Share on other sites

I'm not talking about the pamphlet, that comes with a piece of equipment. I'm talking about the mechanics desk reference that the factory mechanic, at the dealership, would use to reference any unfamiliar item, or procedure. This manual would demonstrate the complete disassembly, procedure. Along with the reassembly if it's different. For the entire machine. It's a large book! These things are typically called the shop service manual. You have to ask about it SPECIFICALLY. Because most people don't care enough to ask, they're not that popular. That is, until ten or twelve years later, when they're obsolete, and no longer available. These days they're probably a pdf. You'd want to download that, and print, place in a notebook. So that when everyone else can't find it. You have it. I get one for EVERY piece of equipment, large, or small. Because new stuff rarely breaks down, if it's quality stuff. But when it does, there likely isn't any shop manual available.

  • Like 1

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Vernon Brown
      Has anyone done an engine & tranny swap on an 1100cc sand viper?
    • By zebediah101
      Hey guys as the title says. I'm looking for a transmission for my 2008 Joyner 800cc mini viper. Let me know if you have anything available, thanks!
    • By KTMspeedFreak
      For some reason, out of no where all my tranny flue is leaked out from around one of the seals in tranny where the drive shafts come out. 
      Buggy was in the garage for few days with no leaks, then randomly all the oil just started dripping out from one of the seal areas?? I didn’t even move the buggy... The only reason I can think as to why it went from zero leaks to major leak is the cold weather here in FL may have shrunk the seals?? Anyone else think this is rather strange? 🤨🧐
      Also, antonella’s know where I can order these? 
    • By Davo
      I have a Hisun 400 UTV that has developed a sneaky oil leak from the end of the black plastic thing protruding from the side of what I think is the transmission on the driver’s side. Looking for any guidance or advice as to what this thing is and whether it’s fixable.


    • By DigitalDan
      I haven't been able to locate a Service Manual (aka Shop Manual) for the Hisun Sector 250.  Does anyone have one they can share with me?
      I have the service manual for the Strike 250 (thanks Strike250), but I'd like to have the one specific for the Sector/Vector.  Thanks!


×
×
  • Create New...