Quantcast
Jump to content

Gerald Dillman

2008 Joyner trooper transmission parts

Recommended Posts

Looking for a output shaft for a Joyner trooper t2. Went to move the buggy after sitting all winter and it appears the out put shaft that drives the rear wheels broke off inside the transmission so looking for the shaft or a complete transmission if someone has one

Share this post


Link to post
Share on other sites


Hi Gerald & Travis & Dan

This is Casey from Leaf Asia.  

Thanks for Travis, the Amazon link you post is my inventory in Amazon FBA warehouse. 

Thanks, Dan for kind help on confirming. 

Hi Gerald, 

Please refer to the Amazon page for the shape of the shaft . Do you have manual for T2, if not, you can send email to me and I will send the manual to you for check.   

My emal is [email protected]

Since the part is in US, Amazon currently can not send parts to Canada.  if you need, I will arrange shipping from China to you. Let's discuss in Email. Thanks 

 

Best regards

Casey / Leaf Asia  

 

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Gorson
      does anyone have any knowledge of these clutchless automatic manual shift utvs? I have a 4 seater 4x4 650 that the wiring has been butchered and there is no longer a shifter knob. I'm just curious to know if anyone has a wiring diagram or any knowledge of these units without a clutch pedal and are electric shifted and not cable gear driven
    • By Rifman
      Where can i get wheels for my cub cadet challenger 700?
    • By wrgenoa
      2016=2018 Glass Rear Panel for Polaris General 1000 4 Purchased January 2018. Never used. Asking $200.ed. Part No.: 2881113.
    • By gmaviation
      Sorry if this is not the place to post for sale.  I could not find Joyner for sale forum.  For those that do not know the Joyner, these are $12K new retail.  I just purchased this one last year and only has 139.4 miles.  
      1000cc with 5 speed manual transmission. Can be street legal. Already has all equipment installed. 4x4 or 2wd. Winch, LED lights.  These seem more popular in the Southwest for desert riding, but we had a great time riding with our family here in NC and WV on trails and our land. It is my understanding the engine is the same engine that is in the John Deere Gator. These have super large suspension and axles. I cannot think of any other unit you can buy at this price and have 4 seats and do what this one does. I also liked that I could teach my kids how to drive a manual.   email me at [email protected] 






    • By bmoody4550
      I recently got a 2006 Joyner 650cc Commando. It was not running when i got it.
      I put a new fuel pump and alternator and is up and running.
      My problem is when I originally got it started it seemed I didn't have 1st gear.  I was able to get it moving from 2nd and was sure I got it into 3rd.
      In my process of diagnosing the first gear issue and I realize I have first gear because it is where I thought 3rd gear was. But now I don't seem to have 3rd or 4th gear.
      The shifter itself seems sloppy and needs a little rehab if that is possible. Replacement available?
      Cables are worn so I don't know if they have too much play to properly shift. Can't seem to find any cables available to replace. 
      Can someone tell me which cable should be first and second and 3rd and 4th? One is black and the other is red.
      Ultimately it may be a transmission problem internally.
      As long as I have 1st and 2nd the machine will work for me going through the woods picking up wood.
      Any help is greatly appreciated.
      New to this if you can't tell.
      Thanks
       
       
  • Similar Tagged Content

    • By gmaviation
      Sorry if this is not the place to post for sale.  I could not find Joyner for sale forum.  For those that do not know the Joyner, these are $12K new retail.  I just purchased this one last year and only has 139.4 miles.  
      1000cc with 5 speed manual transmission. Can be street legal. Already has all equipment installed. 4x4 or 2wd. Winch, LED lights.  These seem more popular in the Southwest for desert riding, but we had a great time riding with our family here in NC and WV on trails and our land. It is my understanding the engine is the same engine that is in the John Deere Gator. These have super large suspension and axles. I cannot think of any other unit you can buy at this price and have 4 seats and do what this one does. I also liked that I could teach my kids how to drive a manual.   email me at [email protected] 






    • By Volkz VLOGS
      Is anyone running a piggyback ecu on their trooper!I'm interested in a fuel controller! But one with a little bit more control then the electronic jet Set up they sell. I want timing control and more in depth fuel management!
    • By fettman1176
      Looking for ideas for custom mod ideas for my Trooper fleet.


    • By Kinarfi
      Dealers - - - also see http://www.utvboard....dpost__p__16044 & http://www.utvboard....dpost__p__16045
      No Limits Powersports in Arlington Texas - Contact Jarrad (Snowman6479). (817)695-1151 http://www.joyner-atv-utv.com/
      Silver Bullet Motorsports in Yuma Arizona - Contact (silverbullet). (928) 344-2117 http://www.silverbul...otorsports.net/
      Thin Air Powersports in Spring Creek Nevada - Contacts Tim (Anylizer) or Amanda (Long Track Lady) (775)753-8223 http://www.thinairpowersports.com/
      McCoy Motorsports in Pikeville Kentucky - Contact Art (Art) (606)432-1556 http://www.tobefast....sa-c-63727.html
      Mudslingers Motorsports, Alberta, Canada, Trevor Carson (780) 576-2860 cell: (780) 984-2711 http://www.mudslinge...website_006.htm
      Joyner USA In Phoenix Arizona - Contact Brandon Deruiter Office (480) 882-9612  Email [email protected]   Web site Joyner-usa.com

      I also take suggestions for any and everyone!!
      parts & pieces from dealer in Germany
      http://www.utvboard.com/topic/3168-joyner-parts-and-all-chery-and-lj276-engine-parts/?p=18349
      AIR FILTER K&N RU-1000, RC-4160, and another link
      If you have the new 09 filter box, w/ Fram # CA-7764
      ALTERNATOR BELT 14mmx 755mm replacement that works....Carquest #K040292
      Alternator Belt - Checkers Auto Parts KO40292 - Exact Match
      Battery, according to 2 scoops, Duralast 51-DL is the correct size.
      OIL FILTERS
      Troopers with Thread Size 20X1.5 MM can use:
      WIX 51347, 51334 --- Napa 1347, 1334, PS1334 --- Fram PH6010A, PH3593A
      Troopers with Thread Size 3/4X16 " can use:
      Fram PH4967, Napa 1394 & Wix 5194 (slightly longer than original, Wix 51396 (even longer yet).

      OIL COOLER See thread, http://www.utvboard....768-oil-cooler/

      Oil Pressure Gauge Replacement
      Zorro found some at his Local Marine Supply store
      Sending Unit -- TeleFlex Morse Part # IA15001 0-80 psi, 240-33 ohm
      Gauge -- TeleFlex Morse Part # 57903P 0-80 psi, 240-33 ohm
      Manufactured by Veethree Elec. & Marine LLC
      together cost aprox $80.00
      Says it fits the existing hole perfectly Thanks Zorro
      Plumber added this reference; http://www.spydertal...pressure-gauge/ which Crosses over to a Sierra part# 01858990
      IMHO--I would move the the sender away from the exhaust manifold.

      FUEL FILTER replacement, Fram Fuel Filter G4777

      FUEL PUMP replacement, Bosch 0 580 254 910 According to Brostar, (Thank You!!)
      http://www.ebay.com/itm/Hayg-OEM-Inline-Fuel-Pump-0-580-254-910-0580254910-New-/230568738342#vi-content (updated 05-2015)

      PRE FILTER KNN-RC-4160-DK prefilter
      HEAD LIGHT REPLACEMENT Sylvania H5006 replaces the whole bulb, It works sooooo much better than the original.
      SPARK PLUGS NGK Iridium BKR5EIX-11, NGK 2387, NGK BKR7ES-11, Bosh 3311, Denso Iridium plug 5310 IK22

      CV Boot Kit There appears to be a difference between inner and outer boots, I used a NAPA CVB6862340 for my outer rear, fit good but not tightly on the CV end, I held it on with Tyraps
      Autozone part # 03606. Comes with bands and grease for $11.99, quick/split boot. K2181 95 Geo Metro $15.99
      NAPA #686-2149 fits for the Troopers inner CV. It's a speck tight but only about 1/16".(Lenny)
      Napa 686-2181 CV Boot from a 95 Geo Metro.
      http://www.norrecind...tart=1&cat=1394 or
      Norrec Industries then Application, then UTV, then look up joyner, they have them all
      Polaris CV Boot Kit # 2203438, (PR-8061)
      Also see CV boot for driveline? - UTV BOARD - Side X Side and UTV Forum

      Valves shims are 25mm, Joyner shims start at 2.18 and increase in increments of .02 up to 2.80, The Honda shims come out of CB450s and GL1100s, start at 2.30 and increase in increments of .05
      http://www.mawonline...gle/P137630.HTM
      http://stores.ebay.c...&_sid=120606839

      Master Electrical Switch Key
      http://www.jegs.com/...oductId=1231908
      http://www.pegasusau....asp?RecID=1467
      Make your own, it's easy, I did, just in case mine breaks.

      At the suggestion of one of our members, here's some info on the gas gauge sending unit.
      3 ohms is full, 13 ohms is 3/4, 23 ohms is 1/2, 63 ohm is 1/2, 110 ohms is empty.
      Electrical readings are: F=0.75v-98ma, 3/4=1.91v-82ma, 1/2=2.7v-71ma, 1/4=3.3v-62ma, 0=4.1v-52ma, E=5.0v-39ma
      0 is top of red zone, E is bottom of red zone.


      Manuals and Information


      Trooper T2 weights, 380lb. on each front wheel, 480 lb. on left rear, 520 on right rear TOTAL = 1760 pounds

      down load this and save it!!!!
      Torque Values Select Your type of bolt at the top. http://www.engineers...bles/torque.htm
      My Snorkel Made from a Sears ShopVac 7' Hose and the Extension Wand,


      Oil Drain QuickOilDrainValve.com
      http://www.oildrainvalve.net/ez-oil-drain-valve-ez-103-12mm-1-25/
      the best way to change oil, IMHO Kinarfi
      Fram Sure Drain #SD3

      Paint as recommended by Brostar: http://www.zynolyte..../rustmaster.asp

      Supplier of parts in General

      http://www.cxracing.com/default.aspx
      http://www.jegs.com/
      http://www.summitracing.com/
      Pegasus Auto Racing Supplies - Home Page
      TireRack.com
      McMaster-Carr
      Discount Hydraulic Hose.com

      Tie Rod Dust Boot, Checker Auto#13566

      Rod End / Heim Joint Seals , http://pitstopusa.co...-end-seals.html, thanks rocmoc
      Ball Joint Rod Ends AKA Heim Joints
      16 x2.0mm threat, 16mm ID, 21 mm thick,
      I got mine at McMaster-Carr 4483T36
      PTFE/Kevlar Insert, M16 x 2.0 x 40.mm shank, 21,966 lb static radial load capacity, 23°, $25.60 ea. or $204.80 for 8
      http://www.vxb.com/page/bearings/PROD/Kit12360
      http://www.vxb.com/page/bearings/PROD/Kit12960

      14 Inch Tires That fit our Stock Wheels Note that the stock lug bolt pattern is 4 X 115
      STEEL WHEELS http://www.utvboard....dpost__p__10804
      JC Whitney for all Auto parts - Car, Truck, Jeep, Motorcycle & RV Parts
      Interco Tires SSR-24R - INTERCO SSR Series Tire - Quadratec
      Interco Tires SAM-12 - INTERCO Super Swamper TSL Tire - Quadratec
      TSL Radial | Interco Tire
      Maxxis Bighorn 2.0 AT26 X 11R 14
      General Grabber AT2 27x8.50 R14 95Q 6PR OWL $90.10 http://ssl.delti.com.../GRABBERAT2.jpg
      National Chaparral A/P 27x8.50 R14 95Q 6PR OWL $113.80 http://ssl.delti.com...ChaparralAP.jpg
      Kumho Road Venture MT-834 27x8.50 R14 95Q 6PR OWL $110.30
      Mastercraft COURSER A/T 27x8.50 R14 95Q 6PR OWL $87.00 http://ssl.delti.com...t/COURSERAT.jpg
      Cooper Discoverer LT 27x8.50 R14 95Q 6PR OWL $99.60 http://ssl.delti.com...iscovererlt.jpg
      Laramie Performer RV 27x8.50 R14 95Q 6PR OWL $100.70 http://ssl.delti.com...PerformerRV.jpg
      ITP MUD LITE XTR 27-9-14 $87.99
      ITP TERRACROSS R/T 26-9-14 $144.99

      15 inch Wheels [Be sure to get the correct lug nuts, 12X1.5
      Vision Wheel Inc Vision Wheel
      ITP has one now also, getting info. ITP TIRES - The World's #1 ATV Aftermarket Tire & Wheel Source :: Holeshot

      Non Trooper Info
      u joints for joyner renegade are Spicer 5-1501X and Precision 391. They are American work great. graybeard9
      Differential Bolts
      40 28 to Full 25 96144A227• 8.33
      1100 Trooper T2 ECU Wiring Diagram.pdf

       
      Joyner Trooper Differential Rebuild Kit .doc
    • By giericd
      Hi guys I need help. I searched every where and can't find the answer on line or in threads. I have a 2006/2007 joyner mini viper 800cc fuel injected  chery 3 cylinder. A gear is chewed up in the transmission and I can't find parts. I live in south Florida and we don't have the dunebuggy following as out west so parts and knowledge are hard to come by. It looks like the chewed up gear is part of the shaft everything else looks fine. Wheee can I locate a replacement? Is it true that the internals are the same as some John Deere's? I've read everything from ford escort transmissions to John Deere to suzuki samurai transmission will fit. I don't need maybe I need to know what will work! Thanks in advance




×
×
  • Create New...