Quantcast
Jump to content

Thomas T.

Massimo power steering kit

Recommended Posts

I have a 2014 massimo 500. Where is the best place to order an power steering kit for it. Real hard to steer. Thanks in advance

Share this post


Link to post
Share on other sites


I don't know where you can get a direct fit kit..  But I built the power steering for my Joyner Trooper out of a Chevy 02-07 Vue /  05-06 Equinox electric power steering rack and a controller kit both available on eBay.. The kit gives you a knob on the dash allowing you to control the strength of the power steering assist. Which worked out awesome for me. Because I also put at 2:1 steering quickener! So at speed with the combination of the quickener and power steering my buggy becomes real Twitchy.. LOL!  But, I just turn the knob down and it's good! 

s-l400 (2).jpg

p.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By TCAM
      I recently purchased a 2020 Massimo 400 EFI and  began installing soundproofing to lower the overall body noise.  The model I choose is the crew cab with rear facing seat and diamond plate bed.  
      the first phase involved removing the rear deck and applying Noico 80 mil sound deadening mat over the exposed diamond plate sections of the underside.  This immediately removed the  sound of vibrating metal plate!
      Next phase is to continue this application to the interior of the plastic  around the engine compartment and then any other plastic panel that has a "hollow" sound.   It will add 2-3 pounds to the overall vehicle weight  but it makes a huge difference in noise reduction.  One question I have - there is a vent directly in front of the engine (behind a drivers leg about calf level)  I am strongly thinking about covering this as the level of engine noise here is huge.  The engine is water cooled so I don't think this is a problem as the air input is minimal - but i don't wish to overheat the engine.
      Thoughts?  
        
    • By Tn. Renegade Rider
      Bought new in 2014 Renegade 1100.       Life got in the way and only put 80 miles on it up till now.  During that 5 year time the fuel would go bad and I would drain the tank and refill. Always used 100% gas [never ethanol].  It is garage kept and never spent a night outside.
      Now that I have time to use it, I am having issues.   It will start and run fine for about 10 minutes, and then it will start to miss and then eventually die. After letting it sit for about 30 minutes is will start back up, and start doing the same thing again.
      I have put new plugs in it and have replaced the fuel filter. 
      Any suggestions on what this problem could be?
      Thanks in advance for your help,
      Steve B.
    • By Stratogeezer
      Hi, I just purchased a Massimo MU500 that we are going to use in the North Georgia mountains.
       
      After the first couple of test drives it seems a) somewhat underpowered and loud as hell.
       
      So wondering if I switched out the mud tires with something with smaller tread if that would maybe help?
       
      Also I found a muffler replacement called the “silent rider atv silencer” and wonder if that would help with the noise without killing power.
       
      Thanks!
       
       
       
      Sent from my iPhone using Tapatalk
    • By Akovia
      We have a Hisun Sector EV that is hard for the grandkids to steer. Has anyone heard of adding power steering to this model? Thanks!
    • By Bebop86
      guys- machine ran fine - Pushed button to put in 4 wheel drive and the machine died- I have power at battery and to the fuses but everything is dead-- PLEASE let em know of any ideas- I really do not know what else to look for- thanks
×
×
  • Create New...