By Michael Busby
Hi guys. I'm new here. Just picked up a 2010 Hisun/Tomoto 800UTV yesterday. It's missing one of the body pieces just behind the driver side front tire. Does anyone have a wrecked or parts buggy they are selling parts. Or possibly know where I can find this piece?
Good morning everyone, appreciate any help on this. I picked up a 2013 Hisun 800 for a project. Previous owner had fried a lot of the electrical with a bunch of aftermarket audio equipment, so I have been replacing all of the wiring to give it a fresh start. I'm 95% there with a couple of plugs I can't figure out where they need to be routed and the reason for me reaching out for help here.
1. A female 2-port white plug that comes off the end of the main harness, close to the side where the terminal hook ups tap into the battery. It has a Blue/black-stripe wire and a White/blue-stripe wire. (Pictures: https://ibb.co/m9PRDqX and
https://ibb.co/9pHZsFj). I'm assuming it is another single offset fuse or module like the other pieces around it but can't find anything on what it might be or that wire color combination in the manual/wiring diagrams...anyone know what this guy goes to?
2. On the crank position sensor (torque sensor), the wires that I have coming off of that are a green wire and blue/light-gray-stripe wire (https://ibb.co/FmJLJfs)...any idea on where this guy is suppose to plug in to?
Again, thanks for any help you can provide!
Just purchased a 2018 Hisun Sector 250. The gear shift is hard to engage. Tried depressing the brake pedal, no change. Tried with the engine running and turned off, no change. The gear shift cable, from the dash to the trans seems to be grinding. With my hand on the cable I can feel it grinding, vibrating, as the gear shift is moved up or down. Can this cable be removed and greased or does it just need to be replaced?