Quantcast
Jump to content

Swimmer1

Massimo knight 500 no start

Recommended Posts

Fuel pump does not run when switch is turned on. I checked fuel pump and it is good.

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Felixbot
      I’m working on a 98 mule kaf620. The fuel pump failed. It was making a loud clicking noise and would not accelerate. I replaced it with the cheapest pump I could find on amazon. It failed after a few days. We bought another pump from fuel pump factory and installed it. It began leaking from the seam in the body after about 10 minutes. I contacted them and they sent another new pump. After installing it, same thing; leaking at the seam of the pump. I’m not sure how to move forward. Does this pump have some sort of internal bypass? Being an electric pump, it cannot run all of the time. What am I missing? 
      Any help would really be appreciated, as a grandmother uses this to feed her cattle and is using a red wagon until it is fixed.
    • By Brad
      Hi I bought a project 2008 odes 400 utv. Does anyone know how the fuel hoses hook up and where does the fuel return hose connect to?
    • By Free2bdaring
      I have bought a 2018 Joyner R2. So far I love it. I was not impressed with the dealer I bought from and am wanting to buy some accessories. Can anyone recommend a good dealer or supplier?
    • By Texjpr
      2002 ranger 500 4x4 stopped running and wouldn't restart. Service manual wiring diagram helped identify the hub safety switch as the culprit. Using jumper wires to bypass  switch allowed the engine to start and run normally. Inspection of switch showed melted epoxy and a strong smell of burnt electrical. Unable to find replacement part either used or new. Is there a work around other than jumper wiring?
    • By Carolynski
      I have a Q-Link (Rhino clone) and the fuel injector won't open up and spray. The fuel pump is brand-new and kicks on and primes to the injector but nothing comes out.
      I've cleaned and dielectric greased the electrical plug and the ECU plugs but no change. not sure where to go from here. Any help?



  • Similar Tagged Content



×
×
  • Create New...