Quantcast
Jump to content

Recommended Posts

Has anyone used the groundhog max disc plow with their Mule? I just bought a '20 pro fx and was thinking about buying this disc for some hard to reach food plots. My biggest concern would be bending the hitch receiver.

Share this post


Link to post
Share on other sites


It's got a 2,000 pound towing capacity, I doubt it would bend the hitch...

and depending on how it attaches a couple of shear pins or bolts would prevent it.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Kmrider
      Tried to buy a 2020 Kawasaki Mule Pro FXT and was told their was a stop sale on them, but the dealer had no info on what the problem was or how long until a solution is found to whatever the issue is.   Anyone know anything about this?
    • By Mac250
      Just purchased a 2018 Hisun Sector 250. The gear shift is hard to engage. Tried depressing the brake pedal, no change. Tried with the engine running and turned off, no change. The gear shift cable, from the dash to the trans seems to be grinding. With my hand on the cable I can feel it grinding, vibrating, as the gear shift is moved up or down. Can this cable be removed and greased or does it just need to be replaced?
    • By bjones
      Strange issue and it has happened twice.  Changed oil twice and after a while when oil is checked it is always to full on dip stick.  Looks like at least 1/2 qtr.  I have looked at manual and put in amount called for, 1.16 qt without filter.  What would cause level to appear to full.  Thanks
    • By rjfrider
      Mule Pro MX question:  Is there a trick to removing the center floor panel or "tunnel" other than removing the 8 plastic rivets?  I removed the rivets but the panel won't pop up easily, and I don't want to force it with a crow bar so as not to break some tabs or other hidden parts.  Accessory mount instruction attached.  Thanks for your help.  rider
      Mule Pro MX floor tunnel.pdf
    • By JDH
      Hi guys,
      I have a Rural King version of the Hisun Sector 250 with about 75 miles and 15 hours on it.  It just started being difficult to start and idle.  But if I hold in on the gas a little it will start and run until I left off.  It also runs good and will run good until I stop then it idles for a few seconds then quits.  Its about 4 months out of warranty.  Battery voltage is fine before, during, and after starting.  Oil is clean and clear.  Gas is fresh.   I can hear the fuel pump spool up when I turn the key to actually start it, not when I turn it to the on position though like on most other UTV's I have owned.  Its really odd and has me perplexed.  The only other thing that I have noticed is that the engine temp indicator on the left side of the dash only indicates one bar regardless of how warm the engine is.  Other than that, it runs great.  Just hard to start and won't idle.  Any suggestions?  It has me  perplexed.
      Thanks
       
      Jason


×
×
  • Create New...