Quantcast
Jump to content

robert whitaker

sway bar on a 2019 teryx 4

Recommended Posts



It's main purpose is to give you high speed stability. So if you just put put around or do mudding I don't see why not.

I mean, the engineers at Kaw are smarter than me but a quick Google search showed hundreds of people who have done it and not regretted it.

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Beetle1
      2012 hisun 700 efi front runner  turns over hard and the valves don't move and no compression  any ideas on what could be wrong with it ???? Thanks in advance 
    • By marineengineer56
      Have a 2013 KRF750S Teryx  that starts and runs 10-12 seconds and then shuts down.  Also ,  notice the Multifunction Meter panel acts like it looses power. Turn the key off then back on, the Multifunction Meter panel starts up, then immediately shuts down.  The machine needs to set for at least an hour before trying to start then shuts down again.  [i.e. the symptoms repeat]  I believe the ECU is failing but don't want to make a $500.00 mistake  The service manual only addresses failing sensors, not the ECU.   Any ideas on how to test if the ECU is failing?  If it was a car/truck, my computer scanner will tell me.
    • By Pierre
      Hello again.  I'm wondering if anyone has used CV axles parts for sale.  Basically looking for the CV internals as my ball cages have broke open due to not having limiting straps on my shocks. Any help is appreciated.  Thanks in advance before I start looking for new ones
    • By josephb
      Couldn't find in parts and pieces any aftermarket front lower ball joints for an 09 Renegade. Thanks in advance if you can help.
    • By Ryan Shorter
      Brand New set of front differential output hubs for 2017 Polaris RZR 1000 front differential.  Been sitting around for six months...never been installed!  I have the box from Polaris that they came in.  Part #3235965 ...I'll take $350.  







×
×
  • Create New...