Quantcast
Jump to content

davisgravel

2018 Cub Cadet Challenger 750 Cooling Fan

Recommended Posts

I have a 2018 750 challenger, the cooling fan started running all of the time, even with ignition switch off, it will run till it kills the battery.  I've checked the sensor on bottom of radiator, it's an open circuit no continuity, I found 2 more sensors on top of engine at coolant hose, was able to check 1 of those and it's an open switch as well. I can disconnect all 3 sensors and fan still runs. Only way to kill fan is to unplug it just back from fan motor in wiring harness. Any suggestions would be greatly appreciated.

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By johnpeter
      2018 POLARIS RZR 1000XP TRAILS AND ROCK EDITION On Ebay
      https://www.ebay.com/itm/2018-POLARIS-RZR-1000XP-TRAILS-AND-ROCK-EDITION/114115003653?

    • By Matthew Gray
      Hey there tried to search the forum and come up with nothing, I know i have seen it here. 
      What  is the Delphi code reader needed to Diagnose a 2018 Hisun Sector 750, got one with spark, fuel and no run. bit bizzare.
      Would like to get a code reader from alixpress or amazon or something as we don't have a local dealer, can anyone help me with a part number, or know of a good unit that works?
      thanks very much
      Matthew
    • By johnpeter
      2018 POLARIS RZR 1000XP TRAILS AND ROCK EDITION On Ebay
      https://www.ebay.com/itm/2018-POLARIS-RZR-1000XP-TRAILS-AND-ROCK-EDITION/114097892004?

    • By groged67
      I have an issue with my sector crew 750
       2017 EFI
      Starter engages and spins but does not turn the engine over. Does this mean a bad starter clutch. The starter is new. I started the pull of the cover where the starter clutch is located but cannot get to the back bottom bolts.
       
      Any help would be greatly appreciated!
       
    • By Gary T
      I generally use my challenger for light duty misc. use, and for plowing. The one thing I dislike about this machine is the difficulty in shifting. I've had it the shop and they adjusted the shifting lever, but I still have issues. Some times it shifts ok, but the problem is it is hard to get it to move the lever from high to reverse or low to high or from any gear to the other. Seems I always have to accelerate a little to get it to engage to what gear I need it to go to. This is definitely not normal.
  • Similar Tagged Content

    • By Gary T
      I generally use my challenger for light duty misc. use, and for plowing. The one thing I dislike about this machine is the difficulty in shifting. I've had it the shop and they adjusted the shifting lever, but I still have issues. Some times it shifts ok, but the problem is it is hard to get it to move the lever from high to reverse or low to high or from any gear to the other. Seems I always have to accelerate a little to get it to engage to what gear I need it to go to. This is definitely not normal.


×
×
  • Create New...