Quantcast
Jump to content

Justin Reed

Hisun sector 250 towing

Recommended Posts

I'm sure it's been covered but does anyone know of any aftermarket tow setup I can attach to my sector 250? Or do I need to fabricate something myself? 

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By groged67
      I have an issue with my sector crew 750
       2017 EFI
      Starter engages and spins but does not turn the engine over. Does this mean a bad starter clutch. The starter is new. I started the pull of the cover where the starter clutch is located but cannot get to the back bottom bolts.
       
      Any help would be greatly appreciated!
       
    • By Matthew Gray
      Hey there tried to search the forum and come up with nothing, I know i have seen it here. 
      What  is the Delphi code reader needed to Diagnose a 2018 Hisun Sector 750, got one with spark, fuel and no run. bit bizzare.
      Would like to get a code reader from alixpress or amazon or something as we don't have a local dealer, can anyone help me with a part number, or know of a good unit that works?
      thanks very much
      Matthew
    • By Mac250
      Just purchased a 2018 Hisun Sector 250. The gear shift is hard to engage. Tried depressing the brake pedal, no change. Tried with the engine running and turned off, no change. The gear shift cable, from the dash to the trans seems to be grinding. With my hand on the cable I can feel it grinding, vibrating, as the gear shift is moved up or down. Can this cable be removed and greased or does it just need to be replaced?
    • By JDH
      Hi guys,
      I have a Rural King version of the Hisun Sector 250 with about 75 miles and 15 hours on it.  It just started being difficult to start and idle.  But if I hold in on the gas a little it will start and run until I left off.  It also runs good and will run good until I stop then it idles for a few seconds then quits.  Its about 4 months out of warranty.  Battery voltage is fine before, during, and after starting.  Oil is clean and clear.  Gas is fresh.   I can hear the fuel pump spool up when I turn the key to actually start it, not when I turn it to the on position though like on most other UTV's I have owned.  Its really odd and has me perplexed.  The only other thing that I have noticed is that the engine temp indicator on the left side of the dash only indicates one bar regardless of how warm the engine is.  Other than that, it runs great.  Just hard to start and won't idle.  Any suggestions?  It has me  perplexed.
      Thanks
       
      Jason
    • By Travis
      Do you use OEM (Original Equipment Manufacture) or Aftermarket for Fluids and filters?
      feel free to reply which brands you use.
  • Similar Tagged Content

    • By Matthew Gray
      Hey there tried to search the forum and come up with nothing, I know i have seen it here. 
      What  is the Delphi code reader needed to Diagnose a 2018 Hisun Sector 750, got one with spark, fuel and no run. bit bizzare.
      Would like to get a code reader from alixpress or amazon or something as we don't have a local dealer, can anyone help me with a part number, or know of a good unit that works?
      thanks very much
      Matthew


×
×
  • Create New...