Quantcast
Jump to content

Tyrone

Cub Cadet Challenger 550 EPS Kit

Recommended Posts

Have anyone ever install a aftermarket eps kit on a cub challenger 550 or universal  kits

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Jeff Grizzel
      Have a code flashing E 505 with engine light on
    • By TomWA
      2016 Cub Cadet Challenger 700 has a hitch receiver that requires a vertical pin as opposed to a horizontal pin to attach hitches.  I'm looking for an 18" hitch entender that will attach using a vertical pin and then accept a horizontal pin for a trailer hitch.  I've looked everywhere.  Any ideas on where to find one?  TIA
    • By Overlander
      After turning 2 batteries to water over last winter, I found that my digital dash display is staying on with the key removed. I was originally thinking the issue originated from the ignition cylinder but I'm now thinking its the ECU controller box under the hood. One of the unserviceable relays is making a weird sound when I remove the key. I have both batteries up to full charge and discovered the display issue last week when I saw the lights on in the dark.. Do any of you have any input on this issue? Ignition or controller.. Any help before just ordering parts would be helpful  The controller is $140  not sure on the ignition.. Thanks in advance..
    • By kenfain
      Just picked up a new overhead gun rack. I had to look around quite a bit, because I didn't like the design, nor the reviews of most. They typically rely on a spreader type design. That type of design causes a somewhat loose fit. I needed a more positive fit. So I went with the seizmic 07301

    • By NewCadetOwner
      Hello everyone.  I purchased a 2017 Challenger 750 eps Crew with 400 miles and find the exhaust noise is awful.  I saw in another post chatter about a 2019 exhaust upgrade?  Anyone have info on this?  I also would like to know the typical RPMs for speed.  I am running 4k at 20mph in hi range and it seems like it does not have the power I expected.  
      So far I have added a custom mount rear winch, soft rear window and upgraded LED headligjt bulbs.  I am looking for any other upgrades people have done.
       


×
×
  • Create New...