Made this today:
It's a tow-bar/eye for the front end:
The frame had the perfect place to mount such a thing,--a nice flat-faced robust crossbar with two 10 mm captive nuts:
So I used an 11' long piece of 2"x2"x1/4'hot roll angle iron to make a bolt-on towing eye (also good anchor point if using a snatch block for a double-line pull.
Painted up and installed:
Haven't used it yet but per my calculations it should be good to 12,000 to 15,000 lbs.
By Greg Kilgore
I am the not so proud owner of a POS
2013 CF Moto UForce 600 CF600-5
I just $25.00 on a 54mm x 70mm x 8mm oil seal. Part number 0180-013105. Waited 2 weeks for on-line parts store to get it in. Then waited a week for mail to deliver it.
Now I have all my parts to put wet clutch back together and my $25 oil seal fell apart. Part number 0180-013105.
Call the place I got it from but since it Memorial weekend. Of course there's no one there. Probably a good thing no one answered. Left message but probably Wednesday before they call me back
Tried to call local auto parts store. They can't find anything. I don't think they have the knowledge to. Can't cross reference by size.
I just need a local source for a 54x70x8 oil seal. Anybody got a good part number. I crossed to a timken 24060-1467 but local stores can't find it.
Thanks all for letting me vent a little.