Quantcast
Jump to content

2021 White Mountain UTV Jamboree Aug 18-22


Recommended Posts

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By 44OLDGUY
      What is the best way to tie down a SXS to a trailer. I'm thinking of using a nylon lifting slings (chokers) around a frame member and ratchet straps tightened to an anchor eye on trailer. Trying not to over think it but want SXS to stay on the trailer. Another question is do I place a ATY in front of SXS or rear.
    • By Travis
      you're sick of chinese Crap but really can't afford the good OEM part?
      Starter on the mule, i finally replaced the old D&B electrical starter (on august 28th) on it that was at least 5 years old with probably a million starts on it and apparently D&B no longer makes it/sells it, so i bought a $53 starter from CHYNA on amazon.. on august 19th, well here it is barely 1.5 months later, it clicks several times before it will spin over, all connections were good and i tested the key switch, and trigger wire voltage as well as the starter relay according to the service manual and they all check out. usually a tap with a hammer or if i turn the key back and forth fast several times it will kick in and start. would it be worth my time to remove the starter and lube it??
      I've got the Denso and Kawasaki part numbers but boy... $$$$$$$$$$$$$$$$$$$
      even a Reman denso is $230.
      does anyone know of a decent aftermarket starter maker that might have one?
      i've 12.5 volts at the big cable, and i get the same at the trigger wire as the manual states, but when its in F or R i get no voltage at the trigger, so i know the Neutral safety is working properly.
      and if anyone can find one the DB starter was 190-542 18450
    • By Alex
      Here' s pretty good video on Bobcat UV34 UTVs
       
    • By Kyle Krause
      What a great event - for info on other SxS events like it go to www.utvoffroadadventures.com
       
       
       
    • eManualOnline

×
×
  • Create New...