Quantcast
Jump to content

ATVWorks fuel sight glass


Travis
 Share

Recommended Posts

Kawasaki Mule 1000 / 2010 / 2020 / 2030 / 2500 / 2510 / 2520 /3000 / 3010 / 3020 / 500 / 520 / 550 / 600 / 610

A lot of the older mules use a float and sight glass for viewing fuel level in the tank, mine, like many others has been fogged over for several years making it hard to see the needle. I've used all sorts of cleaners in an attempt to clear it up, but none ever worked long term.

 I finally discovered this kit from ATV Works for $17.00, just the sight glass and new attachment pin (which you can not get from kawasaki)  Kawasaki want's you to order the entire float and gauge assembly for nearly $40. I ordered it last night and it hopefully should be here by the end of the week. When i get it in, i will make a video on how to install it.

image.png.8682a3fa02cf7f9e8845a1f5ab2d9438.png

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Similar Topics

    • By res2fr
      Hello All,
       
       I am trying to find a Scanner that is works for a 2016 MSU500. I found the Tiny Scan TS301 that looks like a decent Scanner but so far have not been able to get confirmation that this works on and older model. It has been stated that it works on the 2019 and newer but not sure about older models. It appears that the ECM/ECU/EFI modules are likely interchangeable between a 2016 and the newer 2019 and on but not sure of the Scanner. I am waiting for feedback from Hisun on this issue right now.
       If this unit is not usable for my model year has anyone found and a Diagnostic Scanner for the older machines, one that works and is Affordable?
      Thanks for reading my post and any information that you may have to share,
      Robert
    • By J Gill
      any suggestions? my 2019 mule sx fi wont idle down completely, I have to lift the box and flick the throttle lever and it comes back down.
    • By Karlibob
      I have a 2020 800 sx with about 16 hours on it.  From day one I have heard a clunking noise from the front end going over bumps.  Has anyone else experienced this?  Also this past weekend while out riding I heard a noise that sounded like the dump bed bounced three or four different times, again has anyone experienced anything like that.  Thanks, gary
    • By Hisunsadman
      I have recently acquired a 2012 CFMOTO 500 CC side by side. The previous owner said that it ran great but had a gas leak by the throttle body that caught fire and ruined most of the parts on top. It also melted the cover and fan for the stator. Does anyone know of a good place to get all of these parts? I usually use Amazon for all my 2020 hisun parts, but can't really find the ones I need for this. If anyone has any ideas I would greatly appreciate it. Thanks in advance
    • eManualOnline
    • By Brian Owens
      I put a deposit on a mule sx xc about a month ago. The dealer said Kawasaki told them to tell the customer there would be a 4-12 week waiting period for delivery.  Do any of you have any insight what the actual delivery wait  time may be?  I live in Tennessee.

×
×
  • Create New...