Leadfoot

Need a good source for some steel wheels, also what is the lug pattern?

Ok I got the pattern --- 4-115.. still need a steel wheel source, I'm wanting to buy some cheap wheels to put street tires on.

Need a good source for some steel wheels, also what is the lug pattern?

I don't use my IAC and if your running without it fine, just use the idle screw to set your idle rpms. All the IAC does is help control the idle when the engine is cold or when you turn the AC and simular things on, it maintains normal idle rpms. You don't really need it.

Lenny

Well I think we resolved it then! Haha I guess i spent 49 bucks on junk! haha Its all good though. Thank you Lenny for your help and everyone else. I guess the power shut off reset my ECU and it starts fine? Lol whatever works!

Lenny, Thanks for the pointers, I shut main power off and tried again, to my surprise it fired up first try, no pumping or anything, but the idle still way erratic, so tried again with the power shut-off, still fired first try but idles same, and also still acts like its in run-away, so i unplugged IAC again and idles fine and fired up first try. So Idk it just seems like IAC would be important, but it runs great with it unplugged... ? I don't know... Also checked for leaks with Carb. cleaner as it was running and found none.

Well how about Saturday Oct.29 everybody can meet up I will be there Oct. 28 If anybody like to ride that day tell me what you all think

I should be able to make that date work, I have to shuffle some things around and make sure my guys can handle things for a day or two. Will keep you posted and I'll try to get some others involved.

Will test tommarow, i have compression tester at work, Also got IAC valve in today from AZ, Will also install tommarow. I'll let ya know!

Ok, Ran compression test, all cylinders within 4-5 psi of 150, Replaced IAC and starting problem still there, Ok heres the wierd part, and i need help with this once again.

Installed new IAC, let the motor go through the initial system test, fuel pump run, etc... Fired it up and the idle went to 1500 rpm, finally came down to about a 1000 and motor sounded really choppy. Revved it up a little and it acts like it wants to run away, it'll hold 2500 until you shut the key off. So i unplugged the IAC and everything went back to normal..???! So let me pick your brains yet again, what in the hell could be going on????

Dave, It's about 4 hours from Louisville you should come.We could fellow each other I could make it the oct 27 - 30 how does that weekend works for everybody. I know some willn't come until the weekend. How about it Leadfoot & Codyjo

Are we doing TN or KY?

If KY, I wont make it, Hyden is over 7 hrs from me.

I ran mine a few weeks ago just to have a baseline down the road. Has 620 miles on it and compression was 150PSI in all cylinders. Tested twice on each cylinder with about 3-4 cranks on each cylinder with all the plugs removed.

Will test tommarow, i have compression tester at work, Also got IAC valve in today from AZ, Will also install tommarow. I'll let ya know!

Your problem sounds vaguely familiar to when I needed a ring job, wouldn't start unless I towed it, then after it warmed up, it was good for the rest of the day, now when I start, as the pump is running I kick/tap the pedal and then stay clear as I hit the starter, but it seems to need the bump before the starter as if it were setting the aic, it starts, idles up and then settles down, I always figured it was just getting it's sensor information and dialing itself in for running. It may pay to run a compression test on it.

Kinarfi

What is normal compression on these things?

Lenny I was thinking IAC also, I ordered one from Jeff in Phoenix AZ, Should make its way to GA shortly (Lol). --Question: May be stupid to ask but could my snorkel be leaning the motor under initial start-up? The motor never misses a beat after initial start-up, like on or two pumps on the gas as its starting and its good. So maybe 1-3 sec. and its all-good.

Also----

Kinda off-subject but was messing around the house the other weekend, riding trails and what-not, went to the mailbox to check the mail and upon coming to the box, I didn't shift into first and stalled it out in 2nd gear easing upon the mailbox, Anyway, when i went to start it back up, it would not. Kept trying over and over again, pumping throttle, holding throttle, cycling the key, etc. And finally started after about 10 min of letting it sit... Never did it again but baffled me none-the-less. (It also ran like crap when it did finally fire up but after a few revs it cleared up) ?? Stumped.

Don't try and start the engine until you hear the fuel pump & fan noise stop.

rocmoc n AZ

Yeah I always let the pump run untill it cuts off, same way with my fuel injected Harley. But it seems to Idle at about 900 already so Im kinda stuck.

Alright, Having issues, and have had issues since i bought it, but no matter when, hot/cold, day/night, etc, You have to pump the gas like a carb.. After you pump it a few times to keep it idling, its fine. I ordered an IAC valve for it but not sure if thats really the issue at hand. Anyone else had this problem? Sorry if this is a double post but i could not find a related topic.

I'm sure there would be at least a few more that would join you if you made the east coast jamboree out here on the west coast(lol).Hope its a big success and you eny it.

Well Im good for late Oct or early Nov. What about everyone else?

Well I hope to get my trooper back this week and I'm going to try it out to make sure everything is right. And I have a couple of houses I'll need to get done I'm hoping to get there mid oct. or end of oct. I'll let you know more later. leadfoot would you like to ride at windrock

I'm down, Lets figure a date.

Ok, Lets do this; If you EC guys are game, I can get a bunch of people together, not all Joyners (We don't live in a perfect world )But, Some RZR's, Some Rhinos, Some 4-wheelers, But people are DTR, Lets get a location and roll with it.

Your fortunate,my wife would say i was being "more" of a butt head.(LOL)

Haha, I know the feeling! Mine says; and i guote: "If you spent as much time with me as you do that Joyner buggy of yours, we wouldn't have ANY problems!"

actually i like all three,nice to have some hard rides mixed with a little easy site seeing.Rocmoc doesnt like the water or mudd.(i kinda agree)

We need to get all you west coast guys out here! I'm sure you'd love the Georgia clay mud!

This is Straight from Durhamtown website:

At Durhamtown you can ride your Dirt Bike, ATV, Side x Sides on over 100 Miles of One Way Trails. We have 9 Tracks, including a Pee Wee Track, a Super Cross Track, MX Tracks, a Dirt Drag Strip and an Dirt Flat Oval Track and Freestyle Park. If you're looking for Single Track; you are at the right place!

Our 4x4 Park consist of 20 miles of Trails with obstacles for Modified Riding and Trails designed for Stock Vehicles as well. Hill Climbs, Rock Climbing, Off Camber & plenty of mud for those Mud Boggers.

Here is Durhamtown ORP website: http://www.durhamtown.com/

Leadfoot , Were do you go riding at Have you ever been to coal creek http://www.coalcreekohv.com/about/ I,m open to anything list some places that you like to go to

We have a spot out here about 45 min from me called Union grove, durham town offroad park witch is a few hours away, Teleco before they closed it mostly down, Sandy creek are just a few but most are drying up quickly.

Coal Creek is exactly 4 hrs 30 min from me.

Ok, My tail lights are cracked and broken and Just dont look good AT ALL, So, If anyone has any for sale that would be GREAT! OR, Any ideas on replacements or mods would be great aswell!

Well I would like to get a east coast ride together I'm open to anything. Wringo lives near Windrock I like that I have been wanting to ride there. I would like some feed back ANYTHING. How many people would like to do this.

I think this is a great idea, I live north of Atlanta, GA and would like to meet up and ride, I'm open for a reasonable ride.

Steve, If you'd rather just email me the pictures that is fine, My email is [email protected], Thanks bud.

-Chris

Leadfoot , were do you ride at do you ever go to brimstone or windrock we have to get together and go riding.I would like to do a east coast Jamboree. How many people on this fourm that lives on the east coast would like to do a ride like the west coast boys do.

No, Used to ride Teleco before they closed it up, not many places to ride anymore around here. Wish there was! I'll second the east coast jamboree!!

Thanks guys, great to feel welcomed! I'm from Georgia, near Atlanta, Dont quite know how this Joyner made it all the way out here but hey, I'm not complaining!!! But anyway, Ill check your galleries and see how you guys did it! Thanks!

-Chris