joynerperformance

I have some Trooper parts available that a friend of mine has asked me to sell. These are all used parts that came off a running Trooper. Here is a list with what he is asking for them. All pricing is plus shipping. I will be putting these items on Ebay but just haven't gotten to it yet. Just too busy.

Shifter assembly with both shift cables and shift lever boot -- $145

Fuel regulator with gauge-- $45

Carbon canister--$35

2- Brake calipers without pads-- $35 each

Clutch Slave cylinder-- $35

Cutoff switch without key (key is the same on all Troopers) -- $10

2- Brake/Clutch master cylinders -- $25 each

starter motor --$125

2 differential locking lever assemblies (go in dash) No cables. $25 for one with rubber knob and $15 for one without rubber knob.

Parking brake assembly incl. brake lever with cable, master cylinder with mount bracket and lever bar --$75

Electric front diff 4 wheel drive actuator --$35

Front differential, not upgraded -- $350 with Lennys upgrade kit, not installed-- $435

Rear differential, not upgraded -- $350 with Lennys upgrade kit, not installed-- $435

Front portion of front drive shaft with U-joints, one U-joint tight other a speck loose. Comes with middle carrier bearing assembly -- $45

2 Rear axel assemblied incl axel, Cv joints each end, Boots each end and short wheel axel -- $95 each

2 front axel assemblies incl axel, inner CV joint only and inner boot --$65 each

Lenny

Hi Lenny send me and email [email protected]

Thanks Rick

Way overpriced. Especially because we are only needing it because joyner put out POS system in the first place. Thanks joyner. I can

get a beautifully manufactured OX Shifter & cable for less.

Joynerperformance

As dealers we recived buggy as they came.Sorry that the box was not vary well though out.But all i can say is that the kit takes about 2 1/2 hours to fab + parts so thats way we charge this price.We sell kits to many customers and had no complant.This is a hobby for me and like to make things for Joyners.

Thanks

Rick

joynerperformance

We carry Python hoods foe 650 spyders

[email protected]

No problem, I will be. Just too busy currently.

rocmoc n AZ/Mexico

Joynerperformance

The Kit is complete.Easy to install Is is a cable system.I have posted a picture of dash leaver it works just like joyner system but is easy to install.With the joyner system you had to remove front drive shaft and replace the nose cone.Our system just replaces the elect unit and install manual cable to dash.It has no gears no plastic all manual kit.And no removing driveshaft or replacing nose cone.1 year warranty

joynerperformance

I sent picture of 4x4 convision kit.You take out old elect unit and install our manual kit.This is manual kit like factory but a lot easer to install

joynerperformanceparts

Our convision kit converts elect to manual 4x4 sustem.Remove old elect unit and install manual unit in its place.Install handel and connect cable.You must cut hole for the dash handel.The picture is for 650 commando.The trooper mounts next to locker leavers.

[email protected]

joynerperformance

Just finish our elect to manual 4X4 kit.

Can ship out next week

[email protected]

1 year warranty

169.00 comes complete just bolt on.

joynerperformance

We have our convision kit ready to sell just recivied patent pending on Fri. its ready to ship out next week.Just bolts in 1 year warranty.

Price is 179.00

Thanks

Rick

joynerperformance

We have gotten are elect to manual 4x4 kit done.We have gotten it Patent Pending we can ship it out next week. joynerperformance@gmail comes with every thing you need just bolts in.1 year warranty.

[email protected]

Silverbullet has boot made out of silcone that will fit.Just give him a call

928 344 2117

joynerperformance rick

They look good.In joy the extra clearance you got.I am glad they worked.

Thanks

Rick

joynerperformanceparts

We have been asked to make a super heavy duty kelver clutch.We have talked to my clutch guy. And we have increase the pressuer plate from our stock keliver 30% more pressure to 50% more. A new disc with more heaft to it.This is for the guys with big H/P.The stock plate we offer is great for guys with big tires and mid increase in power.Check silverbulletmotorsports for bearing he may be able to find one.If bearing was ruff i would try to find new one.They our hard to find sometimes.

Thanks

Rick

Joynerperformanceparts

30 " tires on the 1100 viper will take away to much power.I have tried it and had poor results.The little extra clearance is not worth it.If you have an older 2008 it will have a locked diff.Thats what they came with big tires would put to much strain on the output shaft. For sand a wider tire is better more flotation if you need new tires then go with a Maxxis Big Horn or GBC tire they work great.And for some reason will be bigger than the Joyner tire with the same markings size.Just check it out.

Thanks

Rick

Joyner Performance Parts

I have sold Silverbulletmotorsports.I have been with Joyner for about 9 years.I am going to work on performance parts as a hobby I will not sell stock parts or due any more service work for that you will have to go to Silverbulletmotorsports. Jose was my manager for the last 15 months.So he knows his stuff.Thanks for all the busness and help you gave me with new idears.Hope you the best.I have some killer idears for more power and reliablity if you think of anything maybe i can make it happen just email me.

Thank You

Rick