Hisun .500

does anyone have the diagrams for the 18 pin cdi  actually i only need the center 8 pin plug of it the one with the{ ground coil pulse trigger power } please help im going crazy

ok so i have replaced everything ive got just about 9 or so volts to the wire at the  coil then it slowly goes down if i leave it testing is that normal and  i have nothing coming out the sparkplug

On 5/12/2023 at 7:15 PM, farmer99 said:

You sheared the key on the crank you have to open up the side of the motor on the passenger side there'd be a fan then another cover with the magneto then the key way will be right there on the starter gear! It's a metric woodrife key! Best bet is to buy it on Amazon! 

Checked that so it was the starter clutch

yeah i did and it ran great for awhile till i blew the motor

so this thing is a real turd i have gone through so much im ready  to junk it and live a few extra years but  one last chance  it use to run but now it just sucks money  i replaced the starter clutch and it still is doing the same thing just spinning does anyone think it might be the starter is ti weak to turn it over 

So my hisun 500 is tore up and all the wiring is wasted i was wondering can i pull out all the wiring and just put in the. Basics .please help

So after a long year of replacing just about everything the reason it was cutting out and backfiring  is because it needed a new brain   dam  it runs great now

I've got a 2008 Hisun 500 cc and I've been having problems with it cutting out under load or at a  certain  speed ,or when I floor it its always the same noise and no power I've  changed spark plug  ,coil coil wire valves, ,timing chain ,filter  throttle cable  ,carburetor , stator ,,,,,so this started one day while riding and it backfired a bunch of times and it shut off going down the road but came back on before we stopped we made it home and its never been the same since....please help