Sylvain Gravel

On 2/5/2023 at 5:35 PM, lincolnsq175 said:

Theres a few things you can do to get more torque. You can shim the primary which will give you more torque but takeaway some top end speed. You couls also slug wet clutch which will make the wet clutch grab quicker and harder. Than the best mod but expensive is jbs machined sheave kit which will give you morr power everywhere. You can also i install an epi clutch kit with different weight rollers and secondary springs. Clutch parts for a yamaha rhino 450 fit.

Thanks for the tips.

On 11/12/2022 at 10:13 AM, aefron88 said:

I would keep an eye on it, but at this point you can't really tell if it's not working. There are 6 bars, and almost 8 gallons so it should be something like 1.3 gal/bar assuming the gauge is linear. Most gas gauges tend not to be, in my experience, at least in cars. I have not tried to check the accuracy of my Hisun's gauge.

For trail riding these things should get pretty decent gas mileage, I'm guessing around 20 MPG, so a full tank should be like 150 miles on that machine.

Idling should burn <0.5 GPH.

So you may not have burned much more than a gallon anyway.

Post an update when you burn some more and let us know if it's still having issues.

You were right about the fuel consumption. There are two bars left, that mean the gauge is working. Thanks.

Thanks all of you for the answer.

Hi,

Is there a way to speed up my Hisun Axix 500? With the seat  buckle up, the top speed remains to 28 or 30 MPH.  I have seen there's a speed limiter module right in the middle under the hood. This unit it is a must for the functionality of the vihicle. May be there's some way to hack this device. 

Thanks!!

I ran the vehicle for at least an hour, may be more. The gauge did'nt change. Still the same, no white bars have'nt change. May be you're right, i dont know about this UTV. I'll keep wondering for the result. One thing for sure, I will carry a tank of gasoline in case of running on empty.

Thanks.

Here's a picture of the electronic panel. As you can see, there's no indication of the fuel gauge. The thank is actually at the middle of the full tank.

Here's a picture of gauge.

Thanks.

Hi,

Thank you for admitting me to your forum. I have an issue with my Hisun Axis 500. I bought this vehicle last week, the fuel gauge was totally in good condition. Now it no longer indicates the fuel level. There is no longer any current supplying the gauge. I checked the fuses, everything is fine.

The connections seems ok.

Any idea? 

Thanks