James strambler

I bypassed my ignition switch and went to the solenoid connector. I ran a wire from my positive side of my battery to the push button switch, and from the other side of switch to the red/yellow wire of solenoid. I took the green wire from solenoid to frame ground. 
 

But I will check for a loss ground on the side of engine.

I am troubleshooting the same problem, turn the ignition switch you get power to the dash, no crank, no brake lights. I ordered a brake pressure switch on the master cylinder, I will replace it next.

Did you locate the brake switch on the Massimo Buck 400? I am having the same problem. I can’t find a switch following the brake linkage. How ever there is a pressure switch on master cylinder. Could this be my problem?

On 3/27/2021 at 12:16 PM, T-boss 410 said:

Did you get to the brake switch? Just curious if it helped.