bikermike

Since it is a royal pain to close the front hood, I went to add a charger wire so I don't  have to worry about the hood, I found the screw on the positive post rusted .  this utv is 11 months old. and since it's a Philips head, it was impossible to loosen . had to use vise grips. 
replaced the screw with an hex bolt

42 minutes ago, Joe Breaux said:

most say 20-25 hours or 1 year.. not 1 month unless you never turn it off!    MAKE sure you use an oil approved for wet clutch........ DO NOT use automotive synthetic oil or your clutch will be toast 

most likely translation error, I have the massimo wet clutch  oil

On 1/20/2022 at 10:01 AM, TapBoss said:

First, you can get the oil filter from Massimo (they are on eBay too) or from Amazon  : https://www.amazon.com/gp/product/B07DNRJ7VM/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

As far as changing gears, don't shift while moving - they aren't made that way.  I also found my fluid levels were low off the showroom floor, but if you purchased last fall you would be past the break-in period and need to change fluids by now.  When I did this after 20 hrs there were ALOT of shavings in the differential fluid that was drained out.  Ended up with one in my finger too, so wear gloves.  For differential fluid I went with Lucas.

Another trick on changing gears if it is resisting, continue in the direction you were going just a bit, stop and shift again.

there's some confusion in the owners manual , in one place change the break in oil at 20 hrs, in another paragraph it says 20hrs or 1 month which ever comes first,  so which is correct? I'm at 12.5 hrs but 5 months, sometimes hard to shift, I also go alittle reverse direction to free it

new to forum, t boss in break in period,