Redfox
-
Posts
7 -
Joined
-
Last visited
Content Type
Profiles
Events
Forums
Gallery
Downloads
Community Map
Posts posted by Redfox
-
-
-
Problem solved! It was a 30A fuse tied to the frame above the batteries. The fuse was in pieces
-
I tighten all most all the battery connector and my problem still exists. Do you or anyone else have any suggestions. Thank you in advance for your help.
-
Thanks so much for your assistance and advice. Have a blessed day
-
Does anyone know what code 3.E01 on my E1 charger is?
-
On 5/1/2021 at 2:09 PM, Cougsfan said:
My dealer gave me a complete and thorough service manual loaded on a thumb drive with the purchase of my E1. A dealer shouldn't have a problem with sharing one with you. As I would expect, there isn't a section on suspension squeaks. The unit is quite quiet. If the rig made any engine noise, you probably wouldn't even notice those squeaks.
If you have greased all the fittings I would spray down where the shock springs rub against the shock body with silicone spray. My guess is that is where the noise might be coming from..
On my E1 it was squeezing at the bottom bolt through the shock. Dealer took the bolt out and greased it and no more squeezing. The bolt was a little rusty. Traveling through water may have caused it. I’m sure it won’t last long but at least I know what to do now to fix my problem
Hisun Sector E1 charging issue
in Hisun UTV SxS Forum
Posted
My fuse holder was badly distorted as well, but I was able to remove all the old fuse pieces and replace with a new 30A fuse. After a charge, the fuse was still intact and working properly