Quantcast
Jump to content


Howdy From Cheyenne Wyoming

SmilingBob

By SmilingBob
in New Members Area

 Share

Recommended Posts

SmilingBob Newbie

SmilingBob

Posted
Posted

Recently purchased a 2020 Tracker 800SX. Found it on Facebook Marketplace in Denver Colorado for $11,800. It’s a one owner machine with 186 miles and 36 hours.

It has the following options installed:

TRAIL KIT - 2436-97 $1810 (POLY HARD TOP 2436-649, REAR HARD COAT POLYCARBON[1]ATE WINDOW 2436-623, FULL HARD COAT POLYCARBONATE WINDSHIELD 2436-618, CENTER REARVIEW MIRROR 2436-630)

BACKCOUNTRY KIT - 2436-972 $1592 (BRUSHGUARDS 2436-632, GRILLE GUARD 2436-631, WARN VRX 45 WINCH 10002695, WINCH INSTALL KIT 100008510, REAR BUMPER 2436-633)

These two option kits together run $3402 plus installation and tax. So, the basic Tracker 800SX by itself ended up costing me $8398. It has 26x10-14 tires all the way around.

I plan to use it mainly as a workhorse on my 3-acre place 6 miles east of Cheyenne and as something I can take to town on the county roads if the need arises. Plan to purchase a KFI 72-inch steel snowplow, soft (or diy hard doors), wiper kit, side mirrors, street legal kit, back up lights, and a pull behind rough cut mower. Checked with DMV as to registering it as an MPV and they said plates would run $125. Its secondary use will be a hunting rig, 

Tracker 900 3 quarter.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Xov
      New AMP Pro Owner
      By Xov
      Just received delivery of a 2024 AMP Pro.  Thought I'd start a thread with my impressions as I use it and learn more.  There doesn't seem to be a whole lot of real-world usage information out there on this model.  Hope this will help others as they research.
      Intended Use Cases
      Fire mitigation / slash removal from a 5 acre forested and well-gamble-oaked property.  The previous owners thought as much about fire mitigation as I do about fashion: not much. Snow removal Stump pulling General hauling (rock, lumber, etc.) Weimaraner energy depletion.  Wasn't an original use case, but a nice added bonus.  Experiences So Far
      Wasn't impressed that two of the bumpers on the underside of the bed where it sits upon the frame were missing.  The metal on metal contact has damaged the powder coating and the frame.  I expect a little better QC.
      I've only put a few hours on it, so not a ton to report on usage.  It isn't quiet; it's silent.  I can't even detect an electric note from the motor. I removed (and subsequently replaced) the motor cover noticed that the motor is German and made by Schambuller.  The motor controller is Italian and made by Dana TM4.  Given the operating specs of both I found on the web, I suspect both are higher quality than the previous Navitas (which is supposed to be decent).  The motor is rated at 25 hp and 71.5 lb-ft of torque.  It feels very powerful.  All the torque is delivered instantly, if desired.
      The bed is huge and has an electric dump as standard.  Great feature but would like it to go up a bit more.  Probably not feasible from an engineering perspective, but I want and I need ;).
      Power steering is nice, but vague.  Probably common to many UTVs, but I am accustomed to more direct results from input.  Plan early and plan often.
      In our first full day of usage, we hauled about 1/2 as much slash as the entire rest of the year when I was doing it by hand cart.  I may get fatter, but I'll also get more done.  After a few days of usage, the battery meter has gone down by 1/10th. 
      Until next time...


    • CSM_Retired
      Kioti K9 Power Dump Kit
      By CSM_Retired
      Has anyone installed the power dump on a Kioti K9? If so, does it eliminate the safety lock? Does it work well?
      Thanks for your input
    • monkthumper
      2020 Hisun Sector 750 no pwr to fuel pump
      By monkthumper
      Fuel pump is good (i hotwired it) swapped relay with known good one no help. I'm leanin towards ECU but cannot find wiring diagram online. Dont know how fuel pump relay gets its signal, all fuses good, any help? 
    • Paul in Wisconsin
      Tracker 800SX sway bar
      By Paul in Wisconsin
      I have a 2023 Tracker 800SX LE that I want to add a sway bar to.
      The service manual shows how to remove and reinstall the sway bar.
      I called Cabela's to try and get the saw bar.   They said they can't get one and the 800SX doesn't have one!!??  Then why is it listed in the service manual?? No answer from them.
      Have any of you found a saw bar that fits and what did it cost?
    • Gary Odom
      Tracker 800sx crew 2023
      By Gary Odom
      Noticed the radiator reservoir has a pin hole leak at the seam. unit has less than 600 miles. Anyone else have this issue.

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...