-
Similar Topics
-
By Samjay12
I have a 2022 cfmoto zforce 950 ho sport. Got in some mud last week and had to back out. Now it's making some noise under load only in reverse. What could it be? It's still pulling good.
-
By johnpeter
2016 Polaris Ranger Pro Star ETX ATV UTV 4x4 On Ebay
https://www.ebay.com/itm/145041705560?
-
By GrahamP
I have had a battery failure with one of my batteries, maybe another coming soon and have decided to change all 8 out to US Battery XC1800's. Just to make sure I have the correct connections, can anyone post a few pictures of the battery connections and email me a copy?
Just an FYI, the Dual Pro Eagle Performance onboard charger quit. I am not sure, at this point, whether it is the charger that has failed, or the bad battery causing a low voltage failure. This low voltage will cause the charger not to start, even though it may be still working. (2020 models and above have a different charger). The charger is back with DualPro awaiting a dignosis. If you need to remove the charger, to send back to DualPro, you will need to remove the electrical input port on the passenger side, and the output to the batteries. Then, remove a good number of black zip ties to free both cords. The charger itself is held on by 6 machine screws, 3 on each side of the brackets. Be careful, the charger weighs 27 lbs! The whole unit, including the cords needs to be sent back. The connections are soldered inside the charger and cannot be disconnected.
Thanks,
Graham ([email protected])
-
By johnpeter
Custom Polaris RZR Pro XP Premium only 23 miles! On Ebay
https://www.ebay.com/itm/185844690542?
-
By Cole
Hey everyone, as the subject says I have a 2022 Mule Pro-MX EPS LE and need to know where to connect the ACC wire for a switch panel I bought. The switch panel has 6 buttons to be able to wire up light bars, wench, radio, etc... This will allow it to only receive power when the mule is on instead of my radio being left on draining my battery for example.
Under the seat are 2 fuse boxes next to the battery. On one of them is a fuse labeled ACC - the backside of it has what appears to be 4 wires going into it. I assume I can splice into one of these 4 wires for the ACC wire for the switch panel, just not sure which one and having a hard time finding a wiring diagram.
Am I on the right path here or is there a better location to wire in an ACC wire for this?
Thanks for the help!
-
-
-
Gallery Images
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.