Quantcast
Jump to content


dishonest member

lowgear

By lowgear
in Joyner UTV SxS Forum

 Share

Recommended Posts

lowgear Enthusiast

lowgear

Posted
Posted

RickyChuck posted that he had broken the rear diff in his T2. I posted that I had a rear diff for sale and he replied that he wanted it and left his ph# to call him to set up a deal. I called him to get the details arranged and we agreed to the sale. I would send him the diff and he would send the money. He received the diff on 3/3/16 but never paid for it. After several attempts at calling him and leaving messages he never called back. I have made several deals with other members and they have always been problem free, there was never a need to go thru pay pal or anything else to make sure nobody tried to screw the other guy. So he got the rear diff for free and I am out $200.00 for the diff and $60.00 for shipping. I am writing this to let everyone know about it and so nobody will have a dealings with the jerk in the future. I don't know if this will stay in my post but his name is Ricky Masterson out of Waco, Tx. He already posted his phone number on his post about the rear diff., If you want his home address PM me and I'll give it to you.

hfrick Enthusiast

hfrick

Posted
Posted

I hope is a misunderstanding .. and that he gets back to you and settles up...as much as I like to trust fellow members,Ive learned (on dootalk not here) that there are many dishonest peeps out there...I still do cash/e pay of some sort before I will send anything...also at $200 for a rear diff,that was almost a gift already...Hardy

  • 1 month later...
  • 2 weeks later...
lowgear Enthusiast

lowgear

Posted
  • Author
Posted

Thanks MauyThai1 his name is Ricky Masterson, 137 Parkhaven, Waco, Tx, 76712 It would be great if you can help out. I don't check out the site to often sorry it took so long to get back to you. Thanks Lowgear

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • rdc
      Looking for the left side shaft carrier where the rear bearings go for a 2014 1100cc sand viper, I understand an 800 cc carrier will also work.
      By rdc
      I posted this before , but I had the year wrong. The part I need is for a 2014, I don't know what all years will work, but I need the 2 bearing style with the spacer in the middle. It looks like this pic. If anyone has one I'll buy it rite away. my email is [email protected]. Thanks, RC

    • rdc
      Looking for a left rear shaft carrier (just the carrier) for a 2007 Joyner 1100 sand viper
      By rdc
      Hope I posted this in the right place. Looking for the left side shaft carrier where the rear bearings go for an 1100cc sand viper, I understand an 800 cc carrier will also work. I need the old style two bearing with the spacer in the middle, the new style with just the one wide bearing wont work. If anybody has one I'll buy it right away. my email is [email protected]
    • Sidewinder
      Polaris RZR 800 Rear Differential Pinion Nut Issue
      By Sidewinder
      All mid 2008 through 2014 Polaris RZR 800 series have a big problem with the rear differential pinion nut backing off, allowing the pinion gear to shoot into the rear differential, destroying the rear differential. This has happened with machines with as little as less than 100 miles on them! Reports indicate that there are no problems, nor warnings, until the rear differential grenades, locking the rear axles solid! This requires the machine to be lifted onto a trailer, to be transported for rear differential replacement, as it destroys the case. After failure, rear differential replacement can be quite expensive: labor alone can run from $800-$1200 and a new OEM Spicer rear diff, if you can find one, can run from $1700-$2500! So, if you own any Polaris RZR 800 series between the years of 2008-2014, I recommend that you do this repair before further use of your machine. personally, I have grounded my machine until it can be done. Please check the online post for your own awareness.

    • RBonds007
      2019 Cub Cadet Challenger 400, trailer to transport the Challenger, and new, never used winch for sale
      By RBonds007
      I bought this SxS brand new.  A couple of years after I bought it, I became disabled.  Thus it has only 47 miles and around 16 hours of use.  I have no need to keep the SxS.  I am in Foley, Alabama.  It is very hard for me to get in out of the Challenger.  I would like to sell the set, 2019 Challenger 400, trailer and uninstalled winch (this was bought brand new as well, someone was supposed to help this newbie install and we never got around to doing this). I want  $6500 for the whole set OBO (Serious offers only).











    • Jody Deville
      Joyner 800 Renegade rear axles
      By Jody Deville
      I’m looking to best place to buy replacement axles for the rear in my buggy. Both axles are bad. Where is the best place to find them?

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...