Quantcast
Jump to content


Recommended Posts

Posted

Hey y'all,

Wanted to introduce ourselves We are a small company that manufacture bumpers and attachments for Full Size Polaris Rangers in two year groups 2008-2012 and 2013-2016 and the attachments are quickly interchangeable. The bumpers for both year models are the same, but use a different interface.
Our bumpers and attachments are 100% made in the U.S.A. and hand crafted in Texas!
A little about us, Lance started out making a bumper for himself since he couldn't find anything on the market that did what he wanted it to do. Then more and more Ranger owners started asking for one and the company was born.
I attached a couple pictures of our bumpers, some with and without attachments. Let us know what you think!!
Respectfully,
Chris and Lance
If you would like to take a closer look you can go to our website rydeindustries.com or search Ryde Industries on eBay!!
Destination Fishing Package
photo.jpg
Bumper Alone
DSC_0326.jpg
With cooler and Double Gun Rack
DSC_0118.jpg
With Winch
DSC_0417.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Sidewinder
      All mid 2008 through 2014 Polaris RZR 800 series have a big problem with the rear differential pinion nut backing off, allowing the pinion gear to shoot into the rear differential, destroying the rear differential. This has happened with machines with as little as less than 100 miles on them! Reports indicate that there are no problems, nor warnings, until the rear differential grenades, locking the rear axles solid! This requires the machine to be lifted onto a trailer, to be transported for rear differential replacement, as it destroys the case. After failure, rear differential replacement can be quite expensive: labor alone can run from $800-$1200 and a new OEM Spicer rear diff, if you can find one, can run from $1700-$2500! So, if you own any Polaris RZR 800 series between the years of 2008-2014, I recommend that you do this repair before further use of your machine. personally, I have grounded my machine until it can be done. Please check the online post for your own awareness.

    • By Benny Glasow
      We have pretty much decided to buy a Polaris utv to use around the place and for some irrigation stuff. We were thinking about getting a windshield, top, and rear window. All the  Polaris utv accessories are pretty pricey and I was wondering if anyone had used some after market accessories? Any other thoughts on stuff that we should put on it?
      Thanks
    • By Jamesjoh
      I just bought my first Polaris yesterday and I’m waiting for it to be delivered. I opted against getting the windshield and roof from the dealer — he roughly quoted about $1k for both, which seemed a bit steep — so I’m looking around online first.
      I’m specifically shopping for Polaris Ranger XP 1000 accessories like windshield, roof, and other gear. Where do you all usually buy from, and do members here get any discounts or preferred vendors?
      Thanks!
    • By old fart
      Trying to find battery size for 2023 750 eps secter, wqantedd to see if any one had in stock as we live outside of town. Seems like it's a highly gaurded secret. 
    • By Eric Johnson
      Has anyone used the saramonic, eartec or synco duel ear headphone two way radios with your UTV.  And if so was it with the windshield up or down and was the voice delay an issue.  Looking for a more budget communication system.  I ride a RZR XP1000.  Thank you
×
×
  • Create New...