Quantcast
Jump to content


Recommended Posts

Posted

Coleman UT 400 has a strong sulfur/emissions smell from exhaust all the time.  Kind of like it’s running rich and a catalytic converter is trying to make it run cleaner so it smells bad. Also misfires when warm. Idles fine. Full throttle fine. In between it cuts out. Do these have catalytic converters?  Almost acts like it might be clogged if so. 

Posted

Cats don't work like that..what kind of fuel are you using?  Old ? Any additive in it?  Like octane booster? Should you be running premium? Put you hand behind outlet, feel pressure?  If it's weak, there may be a blockage. Any smoke on start ?

Posted
10 minutes ago, Joe Breaux said:

Cats don't work like that..what kind of fuel are you using?  Old ? Any additive in it?  Like octane booster? Should you be running premium? Put you hand behind outlet, feel pressure?  If it's weak, there may be a blockage. Any smoke on start ?

Fresh 93 octane.  No smoke on start.  What outlet exhaust if so, yes it has pressure.  

Posted

Got me..if it was running rich it should smoke black.and it shouldn't smell like sulphur..if it has exhaust pressure there no restrictions. Good fuel...I'm out of ideas.

Pull the spark plug..if it's wet or black it's flooding.  Should be a dry tan color

Posted
2 hours ago, Joe Breaux said:

Got me..if it was running rich it should smoke black.and it shouldn't smell like sulphur..if it has exhaust pressure there no restrictions. Good fuel...I'm out of ideas.

Pull the spark plug..if it's wet or black it's flooding.  Should be a dry tan color

What is 7 in this parts diagram?

https://parts.colemanpowersportsusa.com/parts/utv_side-by-side-parts/outfitter-400_ut400/muffler-parts

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By amiracle40995
      I’m getting a 700-7 every startup. I’m having to change the plug every 100 miles on 93 octane gas. I got a lower numbered plug that is supposed to burn hotter. I’m wondering why that comes up every time I start it and if it’s related? I included a picture of the code or whatever it is. I haven’t seen the code in the owners manual or the hisun shop manual I have. 

    • By BigWave
      I turned off the key and then tried to start it a minute later and it would not start. I changed out the fuel filter and the injector. still nothing. if i have the injector pulled out and close to the hole the injector will spray fuel into the hole and it will run but the minute you put the injector in it will die. any idea's please
       
       
      Bigwave
       
    • By Homeowner A
      What's the best replacement battery option for a Coleman UTV 400?  
    • By SkyPilot56
      working on a coleman 550 out fitter , had a shit load of codes, coil, injector , and the map sensor for fuel injector replaced all 3 and figured it would start , but no joy have spark (new plug also and inline fuel filter) cleared the codes and still have the engine light , turns over fine but damn thing still will not start, friends daughters were driving it and turned it off to park , and went back to start it and same thing turns over but will not start , with this machine anyone have any ideas as to what the hell , I should be looking for , no plug's unplug checked wires none seem to be pulled apart or broken !
    • By Mike Jenkins
      I have a 2013 Hisun with a 686 Yamaha engine.
      I purchased it from an individual and it ran fine as long as the battery was full.
      I replaced the stator and now it will not start (run).  It cranks fine, has fuel pressure, but will not fire up.  I replaced the coil, no luck there.
      a technician told me that it was the wrong stator and wants a mint to replace it.
      the wires all plugged in when I installed the stator.
       
×
×
  • Create New...