Quantcast
Jump to content


Recommended Posts

Posted

I recently purchased a coleman 550 outfitter and it was a no start so I got an awesome deal no miles got it home turn the key and there's no power I have checked wires grounds and selonoid /fuzes still nothing I'm hopeing some one can help me??? 

Posted

Lol I figured it out for some reason I was not getting power to the fuze box so I jumped it and everything turned on so I took some heavy duty wire and ran it from the power side of the key.       !/ the on position wire !/switch so know when I turn the key everything works ! Dont try this if u dont know what your doing cause u can cause damage just so u know ! Hope this helps some one ! 

  • Like 1
  • 1 year later...
Posted

Have a 2019 Coleman Outfitter 550.    Just shut down while driving.   Finding that when pushing on the brake pedal it blows the F8 fuse so it will not start back up.   Tracked ALL wires and find nothing.   Will startup with a new fuse but hit the brake and its done?  Changed all the relays and still the same thing going on.   Anyone have any ideas.   Only have 30hrs on this unit.   Coleman has been NO HELP at all.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Rusmis91
      I’ve never been around Coleman Utv machines. Do they have a good reputation, durable dependability. Could you compare them to yamaha rhinos or Polaris ranger
       
      thanks in advance
    • By Adrian Domingues
      I have 31 miles on my new T-Boss 550. In order to start I put in nentural and the emerage brake on and push down on brake paddle, then trun ket and get nothing, with key still on I shift to reverase and the back to netural and it starts.  Anyone know what is happening.
      Thanks for your help
    • By mrpro
      I got the fronts adjusted.  I'm trying to raise the ride height in the rear, but my spanner wrench keeps slipping.  Is there an easier better way?  It's like there's too much pressure working against me to be able to twist the height adjusters.  How can I relieve that tension to make them easier to turn?  
    • By OBL
      program will open in old Bud program only/ but will not go in BUDS 2 to let use program ECU problem working on has new engine/ new fuel pump/ injectors/ lines/ sensors/ crank sensor maps/ and new throttle body and injectors. machine starts runs a minute dies/ on 3 rd  try says key not recognized /we put other key in and same thing happens/wait 10 minutes, you can go again/ is there a back door in the program/ also might mention unplug temp sensor and map sensor , it will run a few minutes longer / then die again.
    • By mfitzner
      Cranks after installing a jumper wire to ignition switch to get power but will not start
      Have spark and fuel pump runs
       
×
×
  • Create New...