Quantcast
Jump to content

Operating psi


Jnsz650
 Share

Recommended Posts

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Similar Topics

    • By OviV
      Has anyone found aftermarket side mirrors that work with angled bars on the 800sx other than the super expensive factory ones?
    • By res2fr
      Hello All,
       
       I am trying to find a Scanner that is works for a 2016 MSU500. I found the Tiny Scan TS301 that looks like a decent Scanner but so far have not been able to get confirmation that this works on and older model. It has been stated that it works on the 2019 and newer but not sure about older models. It appears that the ECM/ECU/EFI modules are likely interchangeable between a 2016 and the newer 2019 and on but not sure of the Scanner. I am waiting for feedback from Hisun on this issue right now.
       If this unit is not usable for my model year has anyone found and a Diagnostic Scanner for the older machines, one that works and is Affordable?
      Thanks for reading my post and any information that you may have to share,
      Robert
    • By Kflan99
      Hi ya all,
      My Joyner Diff is busted. Any leads on a mechanic who can rebuild it ...or replace it?  I can seem to find anyone. Thanks!!!!!
      JNSZ650UV

    • By Green Scout
      Hello everyone.
      Here I am showing our Green Scout electric all-terrain vehicle.
      All-terrain vehicle 6 wheeled, electric, side-turning. Rides, jumps, dances, swims, but does not fly. The drive is permanent (but you can turn off any wheel arbitrarily through the controller). The power of each wheel is 3 kW at its peak, the total power is 18 kW. Speed up to 60 km / h. Since the all-terrain vehicle is electric, it starts from a place quickly, drives silently (well, of course, the sound from tires and shock absorbers does not disappear).
      The idea of creating such an all-terrain vehicle came after the experience of operating the Argo all-terrain vehicle. The main disadvantages of the wheeled side-turning all-terrain vehicle are low ground clearance, lack of suspension. To get high ground clearance and suspension, there are two outputs on mini all-terrain vehicles - either electric drive or hydraulic. The hydraulics had to be excluded, since at temperatures below -30C it does not work, plus it always flows. As a result, we settled on an electric transmission. Each wheel is a motor-wheel. Naturally, the motor-wheels were being finalized to be able to be installed on an all-terrain vehicle and to be able to swim. The battery is iron-phosphate, all information on the battery, the charge is displayed on the smartphone. Control of the all-terrain vehicle through the on-board computer. Bicycle handlebar controls. Braking either with the sides through a turn of the steering wheel, or with the gas pedal of all wheels at once.
      Overview video of the all-terrain vehicle
       
    • eManualOnline
    • By Travis
      Kawasaki Mule 1000 / 2010 / 2020 / 2030 / 2500 / 2510 / 2520 /3000 / 3010 / 3020 / 500 / 520 / 550 / 600 / 610
      A lot of the older mules use a float and sight glass for viewing fuel level in the tank, mine, like many others has been fogged over for several years making it hard to see the needle. I've used all sorts of cleaners in an attempt to clear it up, but none ever worked long term.
       I finally discovered this kit from ATV Works for $17.00, just the sight glass and new attachment pin (which you can not get from kawasaki)  Kawasaki want's you to order the entire float and gauge assembly for nearly $40. I ordered it last night and it hopefully should be here by the end of the week. When i get it in, i will make a video on how to install it.

       
       
  • Gallery Images


×
×
  • Create New...