Quantcast
Jump to content

Powersports Destination Riding Experience Survey


Recommended Posts

Powersports Destination Riding Experience Survey

Hi All:

I’m working with a leading powersports manufacturer to evaluate the interest of powersports customers in the development of riding experience centers across the US and Canada.

We’re hoping you will provide feedback around what you would expect at a riding experience sponsored by a manufacturer.

Your valuable input is going to be the driving factor in a potential project to develop destination riding experience centers.

Click on the link below to take you the survey:

https://app.smartsheet.com/b/form/4fc35ead45e54c5994e513a5d3fd7875

Let us know what you think!

Thanks,

Mark

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Nathon S.
      I have a Bennche 700 EFI Bighorn. I’ve recently been unable to get it to start. After a little troubleshooting I realized my fuel pump was not pumping fuel. This weekend I emptied the gas and replaced it with new. I replaced the fuel pump, fuel filter and fuel injector. I also replaced the battery, spark plug and made sure all my fuses and relays were good. I have confirmed that the float on the fuel pump is not obstructed. The UTV is about 12 years old and has less than 100 hours on it. It has not run in over a year.  Not sure whats going on?!? After doing a little reading I'm leaning towards it being an issue with the ECU or perhaps a faulty wire in the wiring harness. Anyone have any ideas on where to start looking or what I could be dealing with? Any help is appreciated, thanks in advance!
    • By klm
      I am beginning to wonder if anyone has had good results from the Chinese crap (Hison, Massimo, Axis, Odes and others) mostly coming out of Texas.  By good results I mean a good reliable two to five year basically trouble free experience.  I have a Massimo and have managed to get almost 10 years out of it (farm use) but certainly not trouble free.   I would not buy another one.
    • By UTVSurvey
      Hello! I am a University of Notre Dame student and have been enlisted by Lippert Components INC. to help them understand you, Side-by-side users. Taking the survey in the link below would help us to help you in improving the buying experience of Side-by-sides. Thank you so much for your attention and participation.   https://nd.qualtrics.com/jfe/form/SV_aYrwsZyjs2ZHK3I
    • By mcraigchr
      I realize that many of you do not have diesel machines.  For those that do, this is for you:
      Just wanted to post my experience this past week.  Here in Texas, we had pretty good dip in temps.  For 4 days it did not get above 25.  At night, it was single digits or close to it.  I always put Sta-Bil fuel stabilizer in the storage tank (30 gallon).  And up until this tank I was using Power Service (white bottle) for anti-gel.  Never had an issue.
      This tank, however, I switched to Stabil All season (anti gel).  It is supposed to good down to -40.  Zap.  That is a big fat lie.  I put in twice the amount called for in the instructions.  Result was less than optimal.  I drove the SxS 100 feet (to go get the mail) and it died.  I looked at the fuel bowl and it was a cloudy, wax substance.  So, the Stabil did not work.  That said, I'm not sure that I ever tested the Power Service in the same manner.  So I am not saying that one is better than the other.
      What are your experiences?  Are these products inferior?  What do you folks in the northern states / Canada use?  Am I missing something?
      CC
    • By A P
      Hi
      I have a 2022 hisun sector eps 550. 30amp fuse is blown for eps. Checked the motor and it’s fine. Opened up the controller and found a bad diode. Dealer wanted 500$ for the controller. Just posting this in case it helps someone. I couldn’t read numbers from the old one so just took a guess and replaced it with a 100v 3amp diode. 
×
×
  • Create New...