Quantcast
Jump to content

Led headlights bulbs I need 2021 Coleman outfitter 400

Ric Silveira

By Ric Silveira
in Coleman UTV SxS Forum

 Share

Recommended Posts

  • 4 weeks later...
  • 5 months later...
OrtegaOyster Newbie

OrtegaOyster

Posted
Posted

Mike, could you provide some more detail on your install?  I have the same machine and will be ordering the exact same lights from Amazon.  Did  you wire into existing fuse box or did you use a sub box etc.?  Any chance you have any close uo pics of the lightbar attached to the bumper?  Thanks in advance!

 

Jason

Jacksonville, Florida

Link to comment
Share on other sites
Mikeboz Rookie

Mikeboz

Posted
Posted

Jason I have attached some pictures that should be self-explanatory. The power wire I connected directly to the battery cable under the hood since the lights come with its own fuse and the brackets I used I got from the hardware store and then painted them with rubber undercoating. I did have to drill two holes into the existing bumper. Hope this helps. 

20220504_133826.jpg

20220504_133129.jpg

20220504_133138.jpg

20220504_133038.jpg

20220504_133015.jpg

20220504_133005.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Alien10
      New here, thanks for letting me join.
      By Alien10
      I have a Coleman Outfitter 550 purchased in January 2022 that runs and operates pretty well.  65 hours on it so far.   It is a work vehicle for my 10 hilly acres with two 1 acre woods and 5 acres of "lawn".  The rest is under a lake. 
      My parking brake does not seem to have any grip.  It worked when new but after a month or so, it is just almost useless.     I press the parking brake pedal hard until it stops. Still, it won't hold even on slight inclines.   I don't see the caliper move as I press the brake pedal down.  There seems to be plenty of pad left on it and the rotor is shiny as if it is rubbing a little when applied, but not enough to stop it from rolling. 
      Any thoughts on possible causes? 
       
    • doncaron
      Looking for part numbers
      By doncaron
      Hello everyone! 
      First of all I would like to thank you for the help with my timing problem, it was the chain. Now I’m looking for the part number for the wet clutch baring.  I’ve been looking for it but my side by side is a 2022 t-boss 550 and it’s not the same as a 2021. Can anyone help me please?
      thank you in advance again. 
       
    • BOYD
      Need to replace both front cv axels on my 2004 KUBOTA RTV 900 DIESEL
      By BOYD
      I have a 2004 KUBOTA RTV 900 DIESEL and I need to replace both front cv axels.I have been online looking at them and there seems to be a lot of different manufactures to choose from. My question is who makes a good aftermarket set of cv axels for this KUBOTA. I have read horror stories of people buying the  cheap Chinese brand only to find out they don't fit or they don't last very long and fail again. I hate to have to spend over $200 a shaft to get OEM from KUBOTA when I'm sure there is a company out there who probably makes it for them or makes comparable to OEM. Thanks for your help.
    • Randyh79
      Headlight Adjustment on 2024 Hisun 750
      By Randyh79
      Does anyone know how to adjust the headlights on a 2024 Hisun sector /Bad Boy Bandit 750? The high beams are where the low beams ought to be.
      Thanks Randy
    • LindaCall60
      Need manual for teardown and rebuild 2011 hs 500
      By LindaCall60
      Purchased a 2011 bighorn banchee. Needs motor work. Not sure what. Husband is mechanic but not computer savvy. So, is there a manual that will tell him how to tear this down?  We have down loaded a service manual, but he says it doesn't tell him what he is looking for. 

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...