My dad and I purchased a Joyner 1100 T2 that we are currently going through. we found that the MOOSE 0430-0664 ball joints are perfect to be pressed in. The only thing that we had to do was using an 18mm drill bit we bored out the hub @ the lower and upper ball joint holes. the bolt still works with the bigger hole and everything mounted up nice. here are the ones we bought also for a cheaper solution through amazon. they may not be name brand but they are definitely a lot better than the ones that were on the vehicle now thats for sure.
https://www.amazon.com/706202045-Maverick-Defender-Outlaner-Renegade/dp/B082VKF359/ref=sxin_17_pa_sp_search_thematic_sspa?content-id=amzn1.sym.2da95b6c-f59a-4699-bc43-d0ff036c6388%3Aamzn1.sym.2da95b6c-f59a-4699-bc43-d0ff036c6388&crid=ISDAA9CBEKDV&cv_ct_cx=can+am+maverick+x3+lower+ball+joints&keywords=can+am+maverick+x3+lower+ball+joints&pd_rd_i=B082VKF359&pd_rd_r=1620e65a-622e-497d-bbe3-afa868754518&pd_rd_w=dWyw9&pd_rd_wg=pCEhp&pf_rd_p=2da95b6c-f59a-4699-bc43-d0ff036c6388&pf_rd_r=04DEW3MWYRJNMDEHBV22&qid=1749575580&sbo=RZvfv%2F%2FHxDF%2BO5021pAnSA%3D%3D&sprefix=can+am+maverick+x3+lower+ball+joints%2Caps%2C166&sr=1-1-6024b2a3-78e4-4fed-8fed-e1613be3bcce-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9zZWFyY2hfdGhlbWF0aWM&psc=1
