Stan M

I have a 2026 Massimo 760L and also the Massimo snowblower attachment and would like to do a permanent install on the control cable and switch. Does anyone have a recommendation regarding the routing of the cable and mounting of the control switch?

Massimo technical support suggested that I remove the cover over the shift gears, remove the two fan gears and then sand the teeth with sandpaper then grease them and reinstall. The teeth had burrs and rough edges, didn't mesh at all well together and definitely needed cleaning up. It's now shifting about 90% better. Hopefully it will completely resolve over time. I'd give the fix a 7 on a difficulty scale of 1-10 mainly due to the location with limited working room. I've attached the repair instructions from Massimo for the next unlucky soul having the same problem. Hard shifting repair.pdf

Thanks for your feedback. I contacted Massimo and they provided me a link to a video showing how to adjust the shift cable. I tried it and it didn't make a difference. I think that adjustment would be more for if the problem was difficulty going into Park or Low. My issue is that the shift lever hangs up at various inconsistent spots going into and between gears. I can finagle the lever by either moving it back a fourth or up and down or rocking the vehicle. I've read that other owners have had the same issue and it resolves after about 10 to 20 hours of operation. I have noticed mine is improving with use and hopefully it will ultimately free up with time.

I just received my 760L a couple of days ago and it's been difficult to shift between gears from the get go. At first I could rock the unit and it would free up for a while but now it's just stuck in reverse and rocking doesn't work. I had the UTV delivered directly from Massimo and there aren't any service centers in my area. Any ideas? Thanks