10 minutes ago, Travis said:

That a wood chipper? Were'd u get it at? @HAWG_MAN

Chippers Direct Online: Tazz K32 (3") 212cc Chipper / Shredder With Viper Engine has a 20:1 waste reduction very nice mulch best on the market @ $599. I have about 9 acres and lots of small limbs/leaves and have used it about 5 hours with no problems.

On 4/28/2017 at 11:02 AM, strike250 said:

Hello there and hope you're having a great time with your new unit. As to the problem of having a trailer hitch, it has to do with where to mount it. As you have noticed, these units have a solid rear axles. Due to their mounting there is no frame area available to mount a traditional trailer hitch. I have had these units down to the chassis and there are really no great places to mount it to. The rear axle is exposed and does not have a housing. The swing arm is about your only option here. You would have to fabricate a bracket from one side of the swing arm to the other and that also perhaps has a strut in the center to attach to the swing arm as well for support. Then you might be able to bring it out rear wards and have your trailer hitch then. I happen to be a mechanical engineer as well so this is just my 2 cents. Is it impossible? no, is it available currently? no. Any good welder and fabricator can make it happen though. Probably some good ol 3/8" plate and you're there. As you can see from the pic below, not a lot of area to mount one to. But there are lots of mounting areas at both swing are to axle points. Matt

I made a Tow bar (3/8 x 3 x 13" Aluminum (2) pcs.req'd

Thanks for your input and I was hoping someone had something available, I am a Machinist of 45 years and can fabricate something that will function. I only have a small hitchpin trailer I need to tow. Thanks again

I just purchased a NOS 2015 Sector 250 and need to know if a rear hitch is available for this model?

43 minutes ago, Kinarfi said:

high light "evol evolution 1100sxs" and have google do a search, it comes up with a Utube video by William Motor Sports ,

I did see a Chery engine, but I don't think it's Joyner, maybe similar to a Kimco or some other chinese rig

That is the Vendor I dealt with. He also has a facebook page.  He has only been a seller on e-bay since March 2. 2017 and he lists all items as Private so you can't contact other buyers or bidders.He also used the same VIN on 2 different listings on this Model and also goes by William Motor Works

On 3/20/2017 at 6:42 PM, wezl99 said:

does anyone have information on evol evolution 1100sxs

I found this on e-bay but never could find any service or parts vendor. I almost bought one but after investigating I believe it's a SCAM. The seller is buying Feedback to look good and he offered me a reduced price BEFORE the auction ended(I was not high bidder). I asked him to send an Invoice and the address on the invoice is not his (It is in Asburn,VA and I searched it on Googled maps and contacted a business in the same building and they never heard of his store. I have reported him to e-bay but he is still selling. I would stay away from this seller if that is where you found this UTV as no one in the US is selling this model and no other information can be found. 

From my research this looks like a scam...........found it on E-bay under UTV's

L'm looking at UTV's and found one I like and at a great price. It's made in China/Canada but very little info out there. Has anyone know of this unit?