mcraigchr

Not quite as humid in my area of the state.  But certainly enjoying the reduced temps.  Was in the 40's here this morning!

CC

On 9/28/2020 at 8:40 AM, Ridge Runner said:

Hi. Where did you get this?  How’s the new oil working out?  some message boards post say we need to add more than the manual specified oil to protect the wet clutch.  Did you just put in the little less than 2 quarts?   Have you been able to locate a parts and service manual?  I’ve written to 
Coleman and HISUN with several questions, zero response.    Thanks 

I got the "jaw" style filter wrench from Advance Auto Parts. 

https://shop.advanceautoparts.com/p/lisle-import-car-oil-filter-wrench-63600/25981259-P?searchTerm=filter wrench

I added 2.5 quarts (over filled per suggestions I had read) of Mobil 1 10w-40 4T.  The shifter is 1000% smoother.

I have the owner's manual.  A service manual is proving difficult to find.  

CC

UPDATE #2:

Last ditch effort.  Bought the following.  It worked.  The filter was extremely tight, but this and a long torque wrench (and extensions) got it loose.

Oil is changed and shifting is much smoother.

UPDATE:

Broke the strap on the strap wrench trying to remove the filter.  The other item that I listed above will not fit over the end of the filter.  Just a bit too small.

There is not enough room to drive a screw driver through the filter and have any travel to be able to loosen it.  The seat pan is in the way and simply removing the seat pan on this model does not seem to be an option without removing large portions of the body.

I think I am at the point where I need to find certified service center somewhere in central Texas.  Unless someone has another suggestion?

CC

Howdy all,

I searched the forum (and the internet in general) for this and didn't find anything that looked like an answer.

I purchased a Coleman 550 from Tractor Supply last October.  Runs well.  Really only one issue that I have had and that is a dragging brake pad.  Still haven't fixed it, but hope to soon.

For now, it is time for the first oil change (38 hours).  After some reading, I decided to use Mobil 1 4T 10w-40.  I also purchased a filter from motorcyledoctor.com.  Got the filter and noticed that there is a hex head on the end.  I thought "Hey that's nifty, but I wonder why they did that?".  Then I went to change the oil and I know why now.  Which brings me to my question.

How in the hell is one supposed to get that oil filter off?  First off, it is not obvious how to take the seat base out to get leverage.  I thought about cutting out the plastic above where the filter is.  But decided against it for now.  I tried my best to work within the tiny space given to get the filter out.  I have a number of different filter wrenches.  Only one is able to fit over the filter.  But ... I could not get the filter to break loose.

So, I ordered a strap wrench from Amazon.  

https://www.amazon.com/gp/product/B01MZH57V5/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

In case that doesn't work, I also ordered this:

https://www.amazon.com/gp/product/B07FVNH2QV/ref=ppx_yo_dt_b_asin_image_o01_s00?ie=UTF8&psc=1

My intention with the latter is that if the strap wrench does not work, I will punch a hole or two into the side of the second product.  Put it over the end of the filter, put two screws into it and hope I can break it loose.

Anyone else experience this incredibly difficult task?  I have always worked on my own vehicles and have had some difficult circumstances, but I always prevailed.  Not this time.  The Coleman 550 b*tch slapped me this weekend and is pointing and laughing at me.

Any suggestions or recommendations would be great.  If nothing else, just some content on the subject so that someone else who might be having the same issue can find this and get some ideas.

Thanks,

CC