Quantcast
Jump to content

Flyrider

Members
  • Posts

    8
  • Joined

  • Last visited

Posts posted by Flyrider

  1. Make sure idle down and push hard on brake if necessary a couple times before going into reverse or park. Also it’s a high rpm low horsepower engine. For any kind of load like grading use low range to keep rpm’s up.  Also. Make sure your in neutral , stoped with rpm’sdown to go into 4wheel drive or lock differentials and then only go straight with locked differential.  This can be a high maintenance machine. Highly electronic, digital and perhaps overly complex.

  2. It is very easy to hit the switch on locking the front which is only to go straight.  If you try to turn it puts stress on the gears.  I’m considering putting a cover over switch so as not to accidentally turn on.  Front 4wheel drive no problem as long as both wheels not locked together.  The back locked together still stresses turning just not as bad as front.  Manual says locking front or back for straight only.

  3. Just purchased a 2017, 750 challenger with 148 hours with one hour on new 2019 engine from Cub Cadet that per invoice cost $4704.28 + tax.  That’s almost half of what the whole UTV cost new in 2017.  Unbelievable!  I have serviced everything as per manual and done the things posts on forum said to do to reduce noise. Has old exhaust and per this forum will probably break soon. Just ordered a new rear window to cut down on dust and air.  Plan on taking to cabin we have near Custer SD in Black Hills with US Forestry roads all around us. Should be fun if reasonably reliable.

    • Like 1
×
×
  • Create New...