Hoppy one
-
Posts
4 -
Joined
-
Last visited
Content Type
Profiles
Events
Forums
Gallery
Downloads
Community Map
Everything posted by Hoppy one
-
I replaced the stator on our Bennche 500 because it was not charging. It ran as long as you kept the battery charged. I replaced the stator now it’s not firing. The only problem I found was a wire in the new stator for the crank position sensor was in the wrong place in the plug. I switched it around but still no fire. Putting a meter on those wires and cranking the motor showed no voltage from the crank position sensor. Something I did or a bad “new “ part? Thanks for any ideas.
-
I worked at getting the air out of the rear calipers and started to get pressure back to the brake pedal. Once the pressure came back found the leak in the steel line running to the back brakes. Replaced it and all is good, the for the help.
-
Thanks for the help. Would this be both calipers or should I just try each one, one at a time?
-
We have had this thing for several years and it’s always worked great. A few weeks ago the brake pedal went to the floor and won’t pump and pressure. I replaced the master cylinder and I still have the same problem. It won’t pump up to bleed the brakes. It still acts like a bad master cylinder. I cannot find any leaks. Any ideas? I’m going to bleed the master cylinder again this weekend. thanks
