docmayer

Hi, I found the fuse box (mounted close to the battery under passenger seat) but I am not sure where the relay is or what it looks like. Will this be close to the switch under the control panel screen?

Thanks! I will give it a lookie see.

Hi Rick, Thanks for replying quickly. My problem is is that I don't know where these things are located? I looked at the wiring and I have the manual but that doesn't show me the locations. Is there an easy way to locate?

My turn signals stopped blinking (would stay steadily on) and now they are totally dead. Any idea?

Gr8! thanks!

Hi all, I noticed that my antifreeze/coolant reservoir is low. It has the "green" solution. what brands do you recommend?

Hey all who responded, thanks for helping. I found a place on the internet who sells Joyners and tires to fit. This is what I found out from the manual and my own measurements..... Rims: front 12x6 and rear 12x8 bolt pattern 4/115 and offset is 4+2 in the front and 6+2 in the rear. The stock tires are 25x8x12 and 25x10x12. Same as the Trooper only 12". Cheapest thing to do is find a set of Trooper wheels & use the tires until bald. Then replace from DiscountTireDirect,com or RockyMountain.com Both also have wheels if you want to buy aftermarket. The specs on the Trooper wheels can be found in one of the Pinned Topics at the top of the Joyner Forum. rocmoc n AZ/Mexico

I am a new owner to a 2009 Joyner Commando and I am looking to purchase new tires and wheels. I do not know the size of the rims and the 4 lug pattern measurement. I am looking for some figures here. I need to know the stock rim size. The tires that are on there now are 27x8x12 front and 27x11x12 rear. And if you have any good websites to purchase....please share. THANKS

Thanks! Will try injector cleaner. And checking electrical. Will let you know

I am a new Joyner owner. I bought a used Joyner Commando 650cc with only 25 hours on it. It lives in the mountains in Arizona. I have had it since June. Ran fine. Now it sputters especially during acceleration. Not as bad after warming it up but still sputters. Any ideas?