Quantcast
Jump to content


2017 Cub Cadet Challenger 750 Timing Set/ engine starting questions

Challenger750HP
 Share

Recommended Posts

Challenger750HP Newbie

Challenger750HP

Posted
Posted

I have a 2017 Cub Cadet Challenger 750 and I have been watching videos on the top end rebuild of the same engine. So, I have one question about it and I’m not sure if someone could help or not. I’m having trouble getting mine to fire over. Could anyone explain how to set the timing on both the flywheel and the cam? I think I may be setting the cam in an incorrect direction. When I put my foot on the brake to start the engine turns over and I have spark and fuel but I cannot get it to fire. The timing chain was off at first and I reinstalled it and tightened it with the tensioner and everything looks good but I cannot figure out how to set the timing perfectly to make it start up. Do you have any suggestions? Or any thoughts on what’s stopping it from firing up? I appreciate all of your help in advance!!

  • Challenger750HP changed the title to 2017 Cub Cadet Challenger 750 Timing Set/ engine starting questions
Jake77 Newbie

Jake77

Posted
Posted

Im a noob when it comes to working on these machines. But I watched a bunch of youtube videos on how to put it in time. Very easy. Look up Limitless Powersports service & repair.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Tim n Deb
      2015 Massimo stalled and wont start. oil, new plug, getting gas verified. cranks but does not start
      By Tim n Deb
      Riding out today it acted like it ran out of gas,  stalled and died and would not start.   Towed back to house,  New  plug added this past month,  plenty of oil, getting plenty of gas, battery cranks good.   Trys to kick in and starts but doesnt.   Two days prior while sitting at a idle it died.  Added gas and it started did my ranch chores with it.  But just now it stalled out cranks but will not start.   Tried to find if fault codes came up on the clock like manual says but not sure I am doing that right.  Any and all help apprecated.  Thank you
    • monkthumper
      2020 Hisun Sector 750 no pwr to fuel pump
      By monkthumper
      Fuel pump is good (i hotwired it) swapped relay with known good one no help. I'm leanin towards ECU but cannot find wiring diagram online. Dont know how fuel pump relay gets its signal, all fuses good, any help? 
    • CaptainMorgan
      Bobcat 2200 Diesel Primary Clutch Rebuild
      By CaptainMorgan
      I have a Bobcat 2200 Diesel (built by Club Car) with a 2-weight Team Primary Clutch I want to rebuild, possibly replace. The clutch has an annoying rattling sound at idle and appears the rollers and weights are worn and loose. When I opened it up, everything looks clean and in great shape. It's just that all the moving rollers and weights seem to have way too much play in them, possibly causing the noise. I've searched for clearance and torque specifications with no luck at all. The UTV has less than 500 hours on it.  Any ideas?
    • Wolfpaak
      Identify this part help needed
      By Wolfpaak
      I think this part is causing a high idle problem(4000 rpm at start up) in my 04 R4 Joyner. I took it out and cleaned it and the problem went away. I just went out to start my SXS and it's idle jumped up to 4 grand again. Can someone tell me what this part is called so I can search for a new one. Or can you point me towards a source. 
      Thanks in advance. 
      Kenny


    • Gerald Mohs
      2023 massiso T-boss 750 cam sprocket removal
      By Gerald Mohs
      Is the cam sprocket a bolt removal or is it pressed on? Dang bolt is on tight. Impact wrench won't even move it.

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...