Quantcast
Jump to content


Massimo MSU 700 UTV

TriGeek

By TriGeek
in Massimo UTV SxS Forum

 Share

Recommended Posts

TriGeek Newbie

TriGeek

Posted
Posted

I am having an issue with my 2016 MSU 700. The ECU fuse keeps blowing. I'll replace it, drive a few yards, and it blows again. I read that if you disconnect the battery for an hour, it resets the ECU. So I tried that, and it actually worked. I was able to drive it for about 30 minutes and thought it was fixed. Two days later, I went to drive it again, and the ECU fuse blew again within a few feet of driving it. I replaced the fuse, and it blew again. Once it blows, the engine actually still turns over, but the dash lights are dead on the dash. 

Help?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Joe Rizo
      2014 Hisun 700 UTV starting problem
      By Joe Rizo
      Hello All,
      We have exhausted all possible troubleshooting steps, now we are in need of some help. 
      Vehicle cranks but will not turn over. Things we have either replaced or tested and are now known good:
      1. Fuel pump (new)
      2. Fuel sensor (new)
      3. Fuel injector (new)
      4. Battery (new)
      5. Spark plug (new), spark tested
      6. fuses (12v to all)
      7. we have 12v at the injector module and 11 ohms resistance
      8. we have fuel in the fuel line to the injector
      9. we have fuel at the spark plug
      10. we have injector pulse, verified with noid tester
      11. brake safety switch tested (couldn't find a separate switch assuming it is using the brake light switch)
      12. seat belt buckled and seat in place (again, not sure if this model has these features)
      13. replaced air filter
      14. replaced several air hoses
      15. flushed radiator and replaced with diluted antifreeze
      16. Drained and cleaned the fuel tank prior to replacing the fuel pump.
      Any ideas, we are open to....Help!!
       
    • Brianmart95
      Kubota RTV520 Starting Issue
      By Brianmart95
      I recently purchased a new Kubota RTV520. When i try to start it i have to do the cold start procedure every time. Once it is running for a few minutes i can restart it without any issues.
      The cold start procedure is turn the key to start position and let the fuel injection system turn on and stop. Crank for 10 seconds and if the unit doesn’t start, turn off and repeat the process 30 seconds later.
      If it hasn’t been used for a week and i try to start it i have to repeat the cold start procedure at least 3 times until i get a successful start. 
      The dealer says this is normal and its not a malfunction on the engine. I feel like its weird for a new machine to have this starting routine. 
      I live in south Texas so the weather is not extremely cold.
      Is ANYBODY having this problem? I am contemplating returning the UTV but i want to know if this is a common problem with the new 520 model.
    • Chile
      MSU 700 Oil Burning
      By Chile
      2018 Massimo 700 MSU. The machine started burning oil all of a sudden. One day fine-- next morning burning oil. Looking for advice. Do I pull the engine to inspect the top end or can it be done with the engine in place? Pro? Cons?
      Any and all assistance is greatly appreciated in advance.
      Chile
       
    • Pick a name
      Shifting issue
      By Pick a name
      The Axis 500 will not shift into low or reverse.  I have high when it should be in low and all the other places it is reverse.  The gears in the shift cover are fine and I shifted it when the cover was off and yet no change (so it can't be the shifting mechanism gears).  I t has been difficult to get it into low for awhile.  But now it is either high or reverse, no neutral either.
    • Rschrem
      2010 700 Hisun starter issue
      By Rschrem
      Hi, my 2010 Hisun will crannk but comes to a stop and only clicks.  It has new battery and solinoid. Battery connections all seem good. Any ideas what the problem is? 

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...