Quantcast
Jump to content


Wheels locking up Issues with 2017 Mahindra/Intimidator 1000 Crew Diesel

mcow

By mcow
in Intimidator UTV SxS Forum

 Share

Recommended Posts

mcow Newbie

mcow

Posted
Posted

I am having a hard time getting an issue diagnosed on my 2017 Mahindra 1000 Crew Diesel. Essentially what happens is you can drive it as normal for about 15 minutes at full speed. It will then slow down by itself to about 5 mph. Then all 4 wheels will lock up. It will intermittently still roll while in neutral but after a while the wheels will lock up again. If you let it sit for a while you can usually get it going again for about another 15 minutes. This happened two times in a row for us and then it wouldn't move at all. I took the CVT cover off (which was a complete PIA btw) and the belt was shredded. At this time I assumed that was the issue. I thought the first time it happened the belt may have just been slipping and then the second time it finally gave way completely. The belt was wrapped around the clutches pretty badly so I decided to take it to a local guy that fixes SxS. He replaced the belt and we assumed everything was ok. Picked it up and the exact same thing happened as before after a few minutes of driving it slowed down to about 5 mph and the wheels would intermittently lock in neutral while we tried to tow it back home. Got it back to the guy that replaced the belt and he admittedly told me he had never worked on this make. He thought it may be one of the clutches but they appear to be working. Anyone have any ideas on what the problem could be? 

 

To add a little context I bought this used from an individual. He told me everything worked great and it did when I test drove it (obviously not long enough I think I only drove it for like 10 minutes then loaded it on a trailer). This happened the first time after driving it the first 15 minutes from getting it home. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Rschrem
      2010 700 Hisun starter issue
      By Rschrem
      Hi, my 2010 Hisun will crannk but comes to a stop and only clicks.  It has new battery and solinoid. Battery connections all seem good. Any ideas what the problem is? 
    • Tim n Deb
      2015 Massimo stalled and wont start. oil, new plug, getting gas verified. cranks but does not start
      By Tim n Deb
      Riding out today it acted like it ran out of gas,  stalled and died and would not start.   Towed back to house,  New  plug added this past month,  plenty of oil, getting plenty of gas, battery cranks good.   Trys to kick in and starts but doesnt.   Two days prior while sitting at a idle it died.  Added gas and it started did my ranch chores with it.  But just now it stalled out cranks but will not start.   Tried to find if fault codes came up on the clock like manual says but not sure I am doing that right.  Any and all help apprecated.  Thank you
    • CaptainMorgan
      Bobcat 2200 Diesel Primary Clutch Rebuild
      By CaptainMorgan
      I have a Bobcat 2200 Diesel (built by Club Car) with a 2-weight Team Primary Clutch I want to rebuild, possibly replace. The clutch has an annoying rattling sound at idle and appears the rollers and weights are worn and loose. When I opened it up, everything looks clean and in great shape. It's just that all the moving rollers and weights seem to have way too much play in them, possibly causing the noise. I've searched for clearance and torque specifications with no luck at all. The UTV has less than 500 hours on it.  Any ideas?
    • Pick a name
      Shifting issue
      By Pick a name
      The Axis 500 will not shift into low or reverse.  I have high when it should be in low and all the other places it is reverse.  The gears in the shift cover are fine and I shifted it when the cover was off and yet no change (so it can't be the shifting mechanism gears).  I t has been difficult to get it into low for awhile.  But now it is either high or reverse, no neutral either.
    • KWinTX
      Information on 2024 Hison 550x Stryker with a No start Issue
      By KWinTX
      I just bought a new 2024 Hison 550 Stryker 2 months ago. this is the second time I have had this issue.  It only has about 20 hours on it. The last time it happened we took it back to the dealer. it was a fuse.  Since we live three-hour time driving there and back. I would like to find another solution if possible.  I have tried all the fuses that seem to have anything to do with starting.  Currently checking the battery. The battery is new. it came with the unit. It is probably 6 months old.  the UTV has all power to everything electrical. lights turn signals and radio all work.  When trying the key to start . it is 100% dead. as in it doesn't even click.  There is a low whirring like the fuel pump is turning on though. The Unit was running and driving just fine.  we shut it down for the night. The next morning my wife found it in this condition.  Thanks for any Ideas or solutions???   Otherwise, it goes back to the dealer tomorrow. Just hope I didn't buy a lemon. Great little UTV when it does run.😅  anyone else ever have this Issue..? 

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...