Trak Tools
-
Similar Topics
-
By CYJSP2009
Hello Everyone
Brand new Joyner CV AXLES are waiting to be unloaded at LA port and then be sent to warehouses in Charleston, TN , BALTIMORE, MD and Groveport, OH. Estimate they will be available for shipments to end customers in about 2-3 weeks.
These CV AXLES are ordered in February this year and now it is middle July. Very long time to get these parts. Qty for each model is not big. Detail as below:
S/N Part No. Description Charleston, TN BALTIMORE, MD Groveport, OH Total
1 D650.03.02.02.00 650 Sand Spider Rear left 3 2 3 8
2 S650.03.02.02.00 650 Commando Rear 7 6 10 23
3 TR1100.03.01.03.00 TR1100 Front 3 3 4 10
4 D650.03.02.03.00 650 Sand Spider Rear Right 3 2 4 9
5 S800.03.02.02.00-R2 800 R2/4 Rear Shaft 4 4 6 14
6 TR1100.03.02.03.00 TR1100 Rear 6 5 9 20
7 S650.03.01.02.00 650 Commando Front Left 3 3 4 10
8 S650.03.01.03.00 650 Commando Front Right 3 3 4 10
Below items are also available. These items can be shipped in days
CAGE:
1. 800 Renegade R2/R4 Front outer cage --- 5 pieces
2. 800 Viper SV1100 Drive shaft rear Left outer cage --- 5 pieces
3. 800 Viper SV1100 Drive shaft rear left inner cage --- 3 pieces
CV BOOT:
1. 650 Commando Left Front / 650 Commando Right Front /650 Sand Spider Rear Left / 650 Sand Spider Rear right / OUT CAGE 2 pieces
2. 650 Commando Rear OUT CAGE 1 pieces
3 Trooper Front / Trooper Rear / 800 R2 R4 Rear OUT CAGE 2 pieces
4 650 Commando Left Front / 650 Commando Right Front INNER CAGE 1 pieces
5 650 Sand Spider Rear Left / 650 Sand Spider Rear right INNER CAGE 1 pieces
6 650 Commando Rear INNER CAGE 1 pieces
7 Trooper Front / Trooper Rear / 800 R2 R4 Rear OUT CAGE INNER CAGE 2 pieces
Anyone who need above items please contact me at [email protected] Thanks.
Other Joyner items needed, you can also contact me and I will try to help.
Have good day
Casey / Leaf Asia
2021-07-20
-
By Ken m
Has anyone ever bought a streetrays lift kit for a 2012 polaris rzr 900 and installed it? looking how to install rear portion of the kit, instructions are very poor
-
By BOW4UM
Live in GA, hunt in KS and I picked up a 2017 Massimo MSU500 and so far just love this thing. I'm lightly customizing it now. Definitely better than my old Grizzly 660 for my current KS hunting.
Ill be picking your brains for info so thanks in advance to you pros for all your help and advice.
-
By CDT540
Just bought a used 2015 MSU 500. I am in the process of replacing all the fluids and generally going over everything. I pulled the outer plastic clutch cover off and oil started dripping out. Oil was everywhere, a huge mess. I thought for sure I had a bad seal on the clutch or secondary. So I removed the clutch and secondary CVT so I could get a look at the seals and they both were dry as a bone. The only two dry spots. Now I am stumped. If oil did not get into the by way of the two shaft seals, how on earth could it have gotten in?
Thanks
Chris
-
By Val in southern NM
Brand new UTV owner. I've been driving a Polaris Sportsman 500 for a few years. We bought a Coleman Outfitter 400 a week ago today, and still trying to figure it out. Would really like to find a repair manual for it, if anybody can point me in the right direction. Our ATV/UTV are primarily to make life easier for us on our small horse place, but now that we have a SXS, we look forward to exploring some of the smaller back roads together. My husband is the mechanic of the family, and found that a repair manual REALLY helped after we bought the VERY well used Polaris a few years ago.
We have the owner's manual, but the nearest place that might provide warranty work/repairs is a two hour drive from here, best we can figure out, so an actual repair/service manual will be really helpful, especially once the warranty is up.
-
-
-
Gallery Images
-
0
-
0
-
0By rocmoc,
-
0
-
0
-
0
-
0
-
0By cmotosales1,
-
0By WCF,
-
0By stevozz,
-
0By BeeZee62,
-
0
-
0
-
0
-
1
-
0
-
0
-
0
-
0By Locoharleyman,
-
0
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.