Quantcast
Jump to content


New 08 Commander owner inboard rear driveshaft broken

JeremyH

By JeremyH
in Joyner UTV SxS Forum

 Share

Recommended Posts

JeremyH Rookie

JeremyH

Posted
Posted

I just bought an 08 Commander yesterday. Test drive it fine.  Got it home and took the kids for a ride.  Made it a half a mile and the inboard rear driveshaft u-joint came apart.  Called Joyner and they tell me that it's one of two driveshafts.  One they still sell and one they don't.  If it's the old style one I have to replace the rear differential in order to upgrade.  Anyone have experience with having the old one repaired or have one hanging around?   Wasn't planning to drop another $1000 in this machine 3hrs after buying it. 

silverbullet Experienced

silverbullet

Posted
Posted

Silverbullet

hi You need to take it apart to see what has happen inside.We do have good rear differential we up grade them our selves at our shop.

When you take it apart send pictures and maybe i can lead you in the right direction.

Thanks Rich

JeremyH Rookie

JeremyH

Posted
  • Author
Posted

Thanks.  I can see where it's broken.  It's right at the universal joint. I'll be pulling it tonight to find out if it's male or female. I'll take pics once it's out. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • rdc
      Joyner 1100 oil pressure problem.
      By rdc
      I have a 2007 Joyner 1100 sand viper and  before it even get's to where the thermostat opens up the oil pressure get's so low I have to shut it down. What could fix this ? I thought about adding an oil cooler with fan, thicker oil, or removing the thermostat. Any advice?
    • nrggaragebuilds
      2004 Joyner Dirt Devil Missing “Prick gear”
      By nrggaragebuilds
      2004 250DL DIRT DEVIL. Hey y’all, I already know this is a long shot. But I am looking for a the “prick gear” assembly that makes reverse work for my external reverse gearbox. OEM PN D250.08.103 and its assembly. I bought the kart as a basket case, but I saw that the reverse box was present so I was optimistic.  Upon starting working on the buggy I realized there was a block off plate in plate of there the normal gear would be. If my understanding is correct that means the transmission no longer has reverse gear. I figured it’s just a standard bevel gear and I could probably find a gear to make work, but I don’t want to spend the time making all the other housing parts to shim the gear perfectly. Has anyone spare parts, or figured out an aftermarket solution from McMaster? I already know it’ll be a challenge to get this box to be happy again, but figured I would ask  
    • mrpro
      Coleman UT400 rear shock height adjustment
      By mrpro
      I got the fronts adjusted.  I'm trying to raise the ride height in the rear, but my spanner wrench keeps slipping.  Is there an easier better way?  It's like there's too much pressure working against me to be able to twist the height adjusters.  How can I relieve that tension to make them easier to turn?  
    • OBL
      can-am 2017 commander 1000xtp cannot get BUD'2 program to connect
      By OBL
      program will open in old Bud program only/ but will not go in BUDS 2 to let use program ECU problem working on has new engine/ new fuel pump/ injectors/ lines/ sensors/ crank sensor maps/ and new throttle body and injectors. machine starts runs a minute dies/ on 3 rd  try says key not recognized /we put other key in and same thing happens/wait 10 minutes, you can go again/ is there a back door in the program/ also might mention unplug temp sensor and map sensor , it will run a few minutes longer / then die again.
    • mike28honda
      Axis 500 cuts out at about half throttle
      By mike28honda
      I have an Axis 500 and never had any problems until now,it cuts out 
      at around half throttle. I changed the TPS with no difference, acts like the seatbelts aren't set but can get up to around 15 mph as long as I don't give it too much gas, thanks for any advice 

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...