Quantcast
Jump to content

New Polaris RZR Baja Front Bumper


Recommended Posts

PolarisRZR-Bumper-2-744470.jpg

PolarisRZR-Bumper-1-704913.jpg

This is the new RZR Front Bumper from RZR Tech. This serves as a totally rigid front bumper and brush guard but also as a heavy duty front-upper chassis reinforcement. This bumper fits the standard RZR 08-09' (w/ removal of the front sway bar) and it also fits the RZR S.

The factory didn't give us much protection for the front or rear of teh RZR, or a lot to work with. But we've come up with some excellent solutions that fit well and look great. Bumpers are made from various sizes of DOM tubing in precision production fixtures that allow for easy installation and the best protection available for your baby. They fit tightly to the body, so the size of the vehicle doesn't change much and there's nothing protruding. These bumpers have already proven to pay for themselves in an accident. Don't find out the hard way.

For installation, you will need to drill four 3/8" holes in the dash bar for the provided hardware to fasten the chassis stiffener to the frame. Besides this, the kit is all bolt together. There is no plastic cutting needed.

Price is $425 w/ Red, Black (or new) Sparkle Silver powdercoat. Price includes installation hardware.

RZR Tech

Website: http://www.rzrtech.com/

RZRtech.com is a division of Spectrum Offroad Inc. the same company that brought the world the Spectrum Sandsports and LT-Rhino product lines. Our parent company has recently been heavily involved with the highest level of Offroad racing and has handed down some pretty amazing technology for us to use in our RZR product line.

View the full article

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By buckrub
      Hey guys! Newbie here. I'm an old man who's better with plowing a mule (4-legged kind) than these newfangled beasts. I, and a friend of mine, just bought new Coleman sxs and are having to finish the assembly. I've been reading on this site and I'm falling on the mercy of you experts. The only way I'm an expert is that an "ex" is a has been, and a spurt is a drip under pressure. LOL First off, the 2 buggies have no ignition switches. They seem to mount on the dash, not the opening in the steering wheel shaft cover, so we ordered new ones that are supposed to fit. They are 8 inches long, and have a 4-wired white plugin which is slightly rectangled when looking at the end of the plug. The trouble is there's nothing to plug into. There is a three-wire grey plug close enough to reach the four-wire plug, but of course, they are not compatible. 
      Secondly, the blinker, light, ect. unit on steering wheel just spins around when touched. I see no way in heaven or earth to secure it. I've looked at a diagram on the Powersports site, but can't detect how it mounted. Fellows I'd be so grateful for any help with this. Me and my mule will even plow your garden for free, for your help. LOL 
       
    • By Nathon S.
      I have a Bennche 700 EFI Bighorn. I’ve recently been unable to get it to start. After a little troubleshooting I realized my fuel pump was not pumping fuel. This weekend I emptied the gas and replaced it with new. I replaced the fuel pump, fuel filter and fuel injector. I also replaced the battery, spark plug and made sure all my fuses and relays were good. I have confirmed that the float on the fuel pump is not obstructed. The UTV is about 12 years old and has less than 100 hours on it. It has not run in over a year.  Not sure whats going on?!? After doing a little reading I'm leaning towards it being an issue with the ECU or perhaps a faulty wire in the wiring harness. Anyone have any ideas on where to start looking or what I could be dealing with? Any help is appreciated, thanks in advance!
    • By Steve Toney
      Hello, my name is Steve and just signing up.  Bought my first UTV yesterday.  It is a Massimo T-Boss 550.  
    • By SafeSledBryan
      Hey guys! My name is Bryan and i am the owner and creator of Safe Sled. Not some crazy corporate backed recovery product, but just some guy with an idea. 
       
      4 years ago, I suffered 11 strokes, and am now 50% paralyzed on the left side of my body. I am unable to work a normal job anymore. I was working on the sled 2 years before this all unraveled. My wife told me to keep working on it since i was pissing her off staying home and doing nothing.
      I still plan on improving and implementing different ideas as the product’s revenue continues to grow.
      if the sled is appealing to you, please check out my website, safesledoffroad.com
      Safe Sled Website
    • By johnpeter
      2011 Polaris RZR 900 Xp On Ebay
      https://www.ebay.com/itm/266702209616?

×
×
  • Create New...