Quantcast
Jump to content


2026 Mule Pro-FXT 1000: Soft cab suggestions?

dogfood

By dogfood
in Kawasaki UTV SxS Forum

 Share

Recommended Posts

dogfood Newbie

dogfood

Posted
Posted

Hello -

New here - and looking hard at a 2026 Mule Pro-FXT 1000.  My wife insists we'll be going with the Platinum Ranch, because in her words, we already saved $ by not going with a Honda 1000-6.  Ready to pull the trigger on this ... almost.

We were looking at the factory soft cab, but then realized this won't work with the standard hard top, as the soft cab has dual back windows to accommodate the 3/6 folding seats.  However, we like the hard top.  So recognizing there's a lot available in the aftermarket world, does anyone have suggestions relative to an aftermarket soft cab (sides, rear window, etc.) that will work with factory hard top, windshield and doors - and also allows for a (relatively) simple 3/6 seat conversion?

Thanks,

dogfood

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Similar Topics

    • Cliffampranch
      2025 Amp Crew Ranch Edition range issues and questions.
      By Cliffampranch
      Hi All,
      I have a 14 mile round trip on level roads to reach the property where I work with my 2025 Amp Crew Ranch (purchased, April 2026).  That 14 mile round trip uses 60% of the battery as shown on the gage for a calculated range of 23.3 miles versus an advertised “up to 50 miles” range.  A mile or two working on the property gets me a flashing gage and warning beeping by the time I get home.  The dealer was good to work with and even with a new battery (yesterday) the results were about the same, although there seemed to be more power and a higher top speed.  I own a Mach-e Mustang so I am familiar with how various conditions affect range, but less than 50% of advertised range just seems like there has to be something out of whack.
      Now I’m wondering if there is a controller and/or software issue affecting the range and performance.  At various points the Amp seems to lose power for no reason and then has trouble maintaining speed.  Any ideas?
      Also, twice now, the brakes seem to have not released fully.  After noticing reduced speed, I stopped and check the rotors and wheel…..HOT!  So, now every time I feel less power, I stopped to cycle the brakes and check the temperature.  Very annoying.  Are there any adjustments to be had?
      And yes, as noted in another post, sometimes the switching from forward to reverse or high to low speed feels sluggish or balky.
      Lastly, while an electric vehicle powertrain is quiet, my Amp was horrible from a road noise and vibration standpoint.  This was easily fixed by locating panels vibrating on other panels or the frame (even the cup holders were vibrating) and installing felt adhesive pads at the contact points (seat to frame, windshield to frame, fenders to frame, etc.).  This is a $10 and 1/2 hour fix that makes a significant improvement in the driver/passenger experience.  Tire noise, yes, but that’s because of the knobby tread.
      I’m trying hard to like my Amp and would appreciate any tips, advice or solutions.
    • Firewalker918
      Anyone customized their uv34XL? Also, looking for seatcovers
      By Firewalker918
      I have a 2021 UV34XL and I am kind of looking to change it up from the orange wheels and maybe do a wrap?  Please share photos of any XLs that has been modified to look better and any seat covers recommended.thanks
       
    • Debbie Hogan
      1999 kawasaki mule 550 c3 exhaust pipe oem part 496021126
      By Debbie Hogan
      I realize this part is discontinued but im trying to find this exhaust pipe fir my dads 550.  His brother who has since passed bought this mule for my dad who is now 90 and he is trying to fix everything on it.  I'm willing to take a used one.  A new one would be great if someone still had in stock.  I'll take anything as long as it is in workable condition.   If anyone has any ideas for me im open to hearing them.  Thank you so much.
       
      Debbie fm  Texas
    • rdc
      Looking for the left side shaft carrier where the rear bearings go for a 2014 1100cc sand viper, I understand an 800 cc carrier will also work.
      By rdc
      I posted this before , but I had the year wrong. The part I need is for a 2014, I don't know what all years will work, but I need the 2 bearing style with the spacer in the middle. It looks like this pic. If anyone has one I'll buy it rite away. my email is [email protected]. Thanks, RC

    • Fmaxiron
      Honda Pioneer 1000-6 back windshield or screen.
      By Fmaxiron
      I just purchased a 2023 Honda Pioneer a couple of weeks ago and had the hard roof and a front Honda Pioneer windshield installed at the shop before taking ownership. As things are drying up here in NC, the grass and dust are beginning to fly right through the back of the cab while driving. I was wondering if anyone has any good recommendations on rear windshields, dust panels, or mesh screens to help stop this?
      Thanks a lot!

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...